TRT A001

Adaptér pro uchycení vodících lišt pro horní frézu

Robustní chromovaná kluzná deska a vodicí lišty tvoří robustní konstrukci v kombinaci s nárazuvzdorným plastem. Pomocí rychloupínacího mechanismu rychle a jednoduše upnete horní frézu do adaptéru. Kompatibilní s celým sortimentem Triton horních fréz.

Vlastnosti produktu

Jemné nastavení pro přesné frézování materiálu horní frézou
Rozdělí se na 2 části pro pohodlné skladování
Chromovaná kluzná deska pro minimální otřepy během práce
Horní frézu k vodícím lištám snadno upnete pro zvýšenou stabilitu a přesnou linii řezu při frézování

Technické informace

Výška 90 mm
Délka 200 mm
Hmotnost 1,5 kg
Šířka 210 mm

Návody


Kompatibilní s

TTS TP

Sada vodících lišt a spojovacích prvků

Dvě vodící lišty 700 mm a dva spojovací prvky. Pro použití s ponornou pilou Triton TTS1400.

Zjistěte více
TTS T1500

Vodící lišta

1500 mm/59" dlouhá vodící lišta. Pro použití s ponornou pilou Triton TTS1400. Vodící lišta je kompatibilní s ponornými pilami značek Festool a Makita.

Zjistěte více

Recenze

{{resourceStrings.Page_Support_ProductRegistration_Successful}}
9 Review(s)
Good product, works with Festool rails (I do not have Triton rails to try it on). Fit on the TRA001 is easy and precise. Works well if you have the overall size on the project to use these as a line up in place of a table.

Track Adapter Zach Tymchuk - 28.01.2020

I was sick of trying to build jigs to cut dados or run a router in a straight line predictably. Having the ability to use my track to guide the router has saved my bacon and produced far more accurate results.

Best router accessory ever Neil Dorin - 15.06.2019

Purchased unit to cut slots for shelf standards in a 6 ft. tall cabinet I am building. After cutting seven slots for the standards I found the unit works quite well. Had more problems with the Triton track lying flat at the end of each section, having to stop at each joint to hold the next section of track down so I could proceed with the cut. The unit appears to only work with Triton router bases due to how it attaches to the base. Overall it did the job it is supposed to do.

router track adaptor Larry curran - 21.12.2018

Functional, accurate and efficient.

ROUTER TRACK ADAPTOR Thys Manganya - 27.11.2018

I purchased the TTSTP to use with my TRTA001 router track adaptor. The two tracks fitted together well when I needed to joined the two halves They stayed last on the work surface and for most applications with my router track adapter they have worked well. My major criticism and disappointment is that hey are totally incompatible with the longer Triton track TTST1500. I would have liked the ability to join a 1500mm track to a 700mm track and only have one join. This would have been a more useful option with the plunge saw.

Useful TTSTP Track Mike Gane - 24.03.2018

I purchased this track adaptor to compliment my Triton MOF001 router. It has been very useful and has allowed me to router far straighter channels with far less effort. It is easy to attach to the router and easy to attach to the guide rail. The micro adjustment has allowed me to route wide channels with ease. This has been a very worthwhile addition to my workshop.

TRTA001 Router Track Adaptor Mike Gane - 24.03.2018

I purchased the MOF001 primarily to use with a router table. It's a brilliant piece off kit. I am very impressed with the way in which the router can be raised and lowered from above the table and the fine adjustment mechanism. I have since purchased the Triton Track adaptor and the Triton track to go with it. I've not had my MOF001 router for very long, but I'm already very pleased with it and would purchase it again.

Top Router Mike Gane - 24.03.2018

Moje prvo iskustvo u radu mi je otkrilo savršen jak i siguran alat. Oduševljen sam sa njim. Hvala za ovako odličan alat.

Dual Mode Precision Plunge Routewr 2400W TRA001 Router Track Adaptor TRTA001 Ozren Kolic - 28.02.2018

Works well with a Makita track.

Great Product Dave Myles - 20.12.2017