TSPS 370

350W Oscillating Tilting Table Spindle Sander 380mm

Dual-action rotating and vertically oscillating spindle for fast sanding and improved work rate. 0 - 45° tilting table for easy chamfering and edge work. 5 x sanding sleeves from 14 - 51mm (1/2 - 2") diameter provide maximum versatility with intricate, shaped workpieces. Long-life 350W induction motor with sealed zero-maintenance bearings. On-board storage for all accessories. Vented table inserts and under-table dust extraction channel. Easy bench mounting or freestanding operation. Simple 0° and 45° calibration. Supplied with 6 x table inserts, 5 x drum washers, 4 x drums, 5 x sleeves and 2 x accessory storage units.

Product Features

Large tilting cast aluminium table for permanent flatness, smoothness and strength
Rotating and vertically oscillating sanding action for the perfect balance between work rate and control
5 x sanding sleeves (14 - 51mm dia) and matching drums provide maximum versatility with intricate, shaped workpieces
Vented table inserts for both standard and tilting modes for maximum dust extraction efficiency and safety
Left and right side on-board storage keeps accessories with the tool for rapid mode changing and convenience
Under-the-table dust channel and large dust port for easy connection to an extraction system, for a cleaner and safer working environment
Bench mounting holes for safe and secure installation when using larger workpieces
Easy calibration and table stop adjustment keep the tool at tight tolerances and produce accurate workpieces

Technical Specification

Material - Primary Construction Plastic
No Load Speed 1425rpm
Oscillations Per Minute OPM 24
Product Height 480mm
Product Length 381mm
Product Weight 14kg
Product Width 381mm
Sleeve Quantity 5
Table Size 381mm
What's in the box - 01 1 x TSPS370 350W Spindle Sander
What's in the box - 02 5 x Sanding Sleeves
What's in the box - 03 4 x Sanding Drums
What's in the box - 04 5 x Sleeve Caps
What's in the box - 05 6 x Table Inserts
What's in the box - 06 1 x Sleeves & Drums Storage Unit
What's in the box - 07 1 x Inserts & Caps Storage Unit
What's in the box - 08 1 x Minor Assembly Parts
What's in the box - 09 1 x Instruction Manual

Included Accessories

6 x Table inserts
5 x Drum washers
4 x Drums
5 x Sleeves (Height: 143mm, Diametre: 13 - 51mm)

Manuals

Reviews

{{resourceStrings.Page_Support_ProductRegistration_Successful}}
2 Review(s)
Decent kit for the money. Add a cap to stop the bobbin raising and perfect

Spindle Sander Michael Dodd - 02/01/2020

This is a great bit of kit for the money. For hobby projects it's brilliant, but for more ambitious jobs too it still performed extremely impressively. I'm more than happy to recommend that you buy one.

Oscalating Sander Michael Dodd - 30/12/2019