TSPS T450

450W Oscillating Spindle & Belt Sander

Double configuration with fast, easy changing between spindle sander and belt sander. Dual rotating and vertically oscillating action for fast sanding and improved work rate with reduced chance of burn. 0 - 45° tilting table for easy chamfering and edge work. 5 x sanding sleeves from 13 - 51mm diameter x 114mm length and 100 x 610mm belt sander provide maximum versatility and work rate with both intricate, shaped plus standard workpieces. Powerful 450W motor. On-board storage for all accessories. Vented throat plates and under-table dust extraction channel. Easy bench mounting or freestanding operation. Non-latching safety on/off switch with dust cover. Supplied with belt sander unit, 5 x throat plates, 4 x drum washers, 4 x drums, 5 x sleeves, 100mm dust port adaptor and spindle wrench.

Product Features

Large cast aluminium table with 0-45° tilting front section for flatness, accuracy and strength
Rotating and vertically oscillating sanding action for the perfect balance between work rate and control
5 x sanding sleeves (13 - 51mm dia) and matching drums provide maximum versatility with intricate, shaped workpieces
All metal belt sander unit with easy belt change provides maximum workrate with straight and shaped workpieces
On-board storage slots keeps accessories with the tool for rapid mode changing and convenience
Vented throat plates and under table dust channel for optimised dust and chippings extraction providing a cleaner and safer working environment
Bench-mounting holes for safe and secure installation especially when using larger workpieces
Fast and easy switching between spindle sanding and belt sanding for optimised sanding of any workpiece

Technical Specification

Finish Plastic
No Load Speed Spindle 2000rpm / Belt 480m/min
Oscillations Per Minute OPM 58opm
Power 450W
Product Height 450mm
Product Length 435mm
Product Weight 12.9kg
Product Width 470mm
Sound Power LW 89dB
Sound Pressure LP 76dB
What's in the box - 01 1 x TSPST450 Oscillating Spindle and Belt Sander
What's in the box - 02 1 x Sanding belt 80 grit
What's in the box - 03 1 x Spindle nut wrench
What's in the box - 04 4 x Sanding drums
What's in the box - 05 5 x Sanding sleeves 80 grit
What's in the box - 06 1 x Table insert
What's in the box - 07 5 x Throat plates
What's in the box - 08 4 x Spindle washers
What's in the box - 09 1 x Hex nut
What's in the box - 10 1 x 100mm Dust Port Adaptor
What's in the box - 11 1 x Sanding attachment

Manuals


Reviews

{{resourceStrings.Page_Support_ProductRegistration_Successful}}
76 Review(s)
It's a great spindle sander with various drums. Good power, does a good job, happy I bought the Triton model.

Great product Scott Fritz - 04/12/2019

Bought the spindle / belt sander at Harrogate show a few weeks ago. Great value for money, well made product and easy to use..changing from belt to spindle is a quick and simple operation. Would recommend this to any woodworking hobbyist

Well worth the price George Johnston - 03/12/2019

I’ve bought 450W Oscillating Spindle & Belt Sander a few weeks ago and used it in the meantime for a couple of hours. I can confirm it does the job and was a good choice for me (woodworking is my hobby, not profession). Potential improvement: I’ll store all accessories separately as they could be easily lost while stored with the sander. That is even more important in case of extra accessories I have.

Good choice Kazimierz Grabski - 29/11/2019

Powerful and accurate. Easy to handle.

Good accurate Product Matthias Leopoldseder - 29/11/2019

High-quality benchtop sander model with all of the features and specs that I expected. It is easy to move around and comes with some really impressive components. I appreciate the six different spindle sizes ,papers and the unique washer for each drum.

Model # TSPS450 110-Volt Oscillating Spindle Sander Shawn Fraser - 29/11/2019

Compact and versatile. You get spindle and belt sander as one device saving you space in workshop. All unused parts have their own place on the machine body. Dust collection works really well. Tilting table adds the possibility of sanding at angles but the pre-set angle locking mechanism is not most accurate one, you may try adjusting the locking spring which may require enlarging the mounting holes. Compared to a spindle sander this device is missing 3" rubber drum which can be bought separately but requires making the table insert as original doesn't have a hole big enough. Also when you buy replacement sleeves you will always get the 3" one. On my particular sander, belt tracking was really fiddly and unreliable - once set it can suddenly make belt go up or down without any pressure applied. Have it replaced but haven't tested new unit yet. Anyway it is a really useful and versatile sander that doesn't take much space. Highly recommended.

TSPST450 - 450W Oscillating Spindle & Belt Sander Krzysztof Pior - 28/11/2019

I’ve been looking to purchase one of these for quite some time, so I contacted Triton to see if there was any shows coming up where I could actually see one, and they kindly advised me of the show at Kempton Park. This gave me the opportunity to take a proper look at one. I’m so glad I purchased one of these is so much better than a conventional belt sander because for the type of work I do as a hobbyist I can sand it at a perfect 90° without having to guess and judge it by eye. The table is set at 90° as a default, but is adjustable, which is perfect especially when sanding bandsaw boxes and other projects. This is a solid piece of kit, but what I really like about it is all a little slots to put all the accessories in, whoever designed this has really put some thought into it. Anyone thinking about one of these don’t hesitate, This is the perfect addition to my workshop and my first experience of Triton, but after this I will definitely be going back to Triton for more, Especially the Thicknesser 317mm. Thanks Triton

The perfect bench sander Terry Johnson - 25/11/2019

As a wannabe woodworker, this machine has changed my processes, giving me the ability to work smarter and faster, switching from belt to spindle in fast and super effective. I used for 4 hours continuously last week and it more than handled the job, cannot rate high enough

Triton Bench Top Sander - Game Changer Ben Goldsmith - 21/11/2019

Whilst I find that the Triton Oscillating Bobbin Sander is a very efficient machine and certainly does a good job,I find that when coupled with a vacuum extractor it is extremely noisy and ear defenders are a must. I am currently making a rocking horse and have found it invaluable in coping with the many different curves.

Triton Bobbin Sander Kenneth Clarkson - 29/10/2019

I’ve been considering buying this sander for a few months now but wanted to see one on show. After contacting Triton they made me aware of a trade show at Kempton Park where I could see one on display and purchase, which I did. I should’ve bought one of these ages ago this is a great addition to my workshop and a very handy tool. It fits straight onto to my CamVac extractor, which is great, it’s well built with lots of handy little compartments to store all the accessories all in one place. It has a nice solid metal top, which looks like plastic but it isn’t, it’s nice and solid and it’s default is 90 degrees which is perfect. Changing from belt to spindle couldn’t be easier and changing the belt is really easy. I’ve only had this for about three weeks but I’ve used it on the Acacia, Ash, oak, Sapeli, lacewood and elm so far and with the standard 80 grit it cuts through them like butter and your knuckles if you not careful as I discovered. Overall this machine is excellent and well worth the money and so much better than standard bench sanders . The best part for me is the design and the storage facilities. This is my first Triton purchase and based on this I will be buying many more.

Excellent design Terry - 27/10/2019

Je suis satisfait de cette ponceuse oscillante. Elle donne de bon résultats et le changement de bande et cylindres et rapide et facile. La position du plateau à 45° est un plus. L'aspiration est au top très peu de poussière. Le seul reproche est que le plastique orange du châssis et taché et rayé. Et le carton d'emballage deux fois scotché et pas en très bon état. J'ai l'impression d'être en possession d'un appareil reconditionné, pour le prix d'un neuf. Que 4 étoiles pour cela.

Bon produit Patrick Coquet - 24/10/2019

Super machine qui me donne entière satisfaction.La TSPST 450 déchire tout. Si vous hésitez à l’acheter, fermez les yeux et foncez !!!

TRITON, une marque qui tient ses promesses ! Ballester - 17/10/2019

Does the job as described

Sander Peter Evans - 14/10/2019

Très satisfait de ce matériel. Efficace et bien conçu.

Parfait Delamotte Gérard - 11/10/2019

The angle between sanding belt and the table is not 90 degrees. This is absolutely critical. It would be great to have a possibility to adjust it.

Pretty good for the price Boris Radosavljevic - 10/10/2019

Je suis très concontent de mon achat. Cette machine semble robuste et fait un travail remarquable. Idéal pour poncer des pièces courbes ou droites. Et le changement des bandes de ponçage se fait très rapidement . Bravo triton

PonceuseTspst 450 Patrick Coquet - 09/10/2019

Purchased a couple months ago when I caught this sander on sale. Found you have to hustle to get the five year warranty - which was an important factor in purchase. Unfortunately, I haven't used the tool much other than to marvel while testing the oscillating belt sander. Overall the construction appears adequate for my primary use - making toy cars for kids. So, at this point I will give it a high rating - not perfect though as I found I needed to replace the supplied sanding belt on the get go. I will get into some considerable use of the sander in about another month and plan to make another report. By that time I should have a feeling for the durability of this tool. Thanks for reading this report.

Initial Impressions Rex Krueger - 09/10/2019

Very satisfied with this tool. We’ll built and thought out. Every tool and accessory has a place to store. Getting great results from belt or spindle

450w oscillating spindle and belt sander Gary Preciado - 25/09/2019

So glad i got this tool. Very versatile and user friendly.every part and accessory has a niche to store. Performance and quality are great.

Well built and easy to use tool. Gary preciado - 29/08/2019

This is a handy tool to have in the shop. It's nice to have a spindle sander and little oscillating belt sander in one. The storage for everything is nice. The only things I'd like improved would be a miter slot or removable 90 degree fence, and the table wasn't able to be square to the spindle/belt without shimming it. Overall a really handy machine, though, and I recommend it.

handy sander Nathan Epp - 23/08/2019

Great service from triton and sander works great best on the market at that price

Sander Stewart brace - 21/08/2019

This is a handy sander. Converting from spindle to oscillating belt is nice in one machine and it all works well. All the accessories store right on the machine. The only thing I'd improve is a miter slot or 90 degree detachable fence.

good sander Nathan Epp - 09/08/2019

Purchased this Triton 450w Oscillating Spindle and Belt Sander after watching video on youtube and thought what a brilliant product to own. It's meet all my expectations of a great product.

Great spindle and belt sander Brian Hawkes - 05/08/2019

I'm delighted with the purchase. The oscillating action along with the interchangeable drum sanding options is simple and effective. I especially like the fact that all components have their own dedicated space on the body of the unit ensuring bits don't get mislaid. The option to pivot the platform is super easy and very effective for sanding angles. The unit is excellent value for money and I certainly recommend it.

Terrific Value for the price! Ian Case - 31/07/2019

Herramienta muy práctica y cómoda para el lijado de precisión y general. La conexión para el aspirado de polvo es muy eficaz. Como única pega, la banda de lija suministrada con el producto, producía un golpeteo debido a una mala unión de la banda, al sustituirla por una mejor cesó el problema. Por lo demás estupenda herramienta.

Buena herramienta Jose M - 09/07/2019

I am a weekend woodworker, meaning that I'm lucky if I can find one weekend per month to build. I bought this sander because I was looking for the combo belt and spindle, and I had read good things about this model. Overall, I like it; it takes a standard belt, and the spindles are also standard lengths. The power is great for its size. I was able to sand down the finger joints of a small box. I used the largest spindle to sand the inside of some curves that I cut in a pair of entryway bench legs. I also used a smaller spindle for the inside of an oven rack puller. The sander performed to my liking. The cast aluminum top feels solid. I only used it in the upright position, but adjusting it down is easy, and the knobs to hold it in place do a good job of keeping it in place (it never dropped while I used it). As one reviewer on Rockler's site recommended, I purchased a separate sanding belt because he mentioned that the seam on the stock belt extends beyond the sanding surface. Sure enough, the belt that came with sander also had this issue. Although I didn't use it, I can see how it can be a problem. Fortunately, a replacement sanding belt is around $7 (US). Switching between the belt and a spindle is easy. the belt unit needs to be lined up, and you can add the fence/guide to help control your workpiece. The spindles use varying throat collars and washers; it's easy to determine the correct washer by holding it up to the spindle. The little hex wrench that comes with the unit works okay; I personally prefer using a box wrench, yet the little hex wrench works just as well and is a nice touch from Triton. The spindles that come with the unit are 1/2", 3/4", 1", 1-1/2", and 2" (13mm, 19mm, 25mm, 38mm, 51mm). Options for larger spindles would be nice. I was able to sand the bench leg curves (5" diameter) with the larger spindle, so it wasn't a concern for me. The dust collection works well. For the spindles, when I connected my shop vac/cyclone system to the sander, I had almost no dust left on the table. The belt has more surface, though, so there was some sawdust left, but very minimal. The only thing is that the dust port is about 2" (I admittedly haven't measured it yet). It's too small for my usual vacuum hose (a Rockler 2-1/2" hose). My vacuum is a Ridgid 4 gallon unit, so the stock hose that came with it fits, although not as snug as I'd like. I haven't had a chance to look for a better fitting. Despite the port connection, in my limited experience, the dust collection is very good. One issue I have is adjusting the tracking on the belt. It's easy to adjust, since it's just an orange finger knob at the top of the spindle unit. But it's a very fine adjustment, and a very small twist could result in the belt shifting up on the device. The last time I used it, the knob felt loose on the threads but had no tension. Yet it seemed to keep the belt tracking properly. But after some vibration, the tracking was off again, so I had to keep an eye on it and readjust the knob. I haven’t contacted Triton about it yet, but might reach out if it bothers me enough. So in summary, this sander works well for me, despite a couple of minor issues. I don't consider them to be annoying enough to steer away from this model. So I give it four stars: easy to use, powerful for my needs, durable, and versatile.

450W Oscillating Spindle & Belt Sander Review Brian S - 14/06/2019

I purchased the belt spindle sander, a great purchase. I looked at several other brands but liked the Triton the best. All had the same functions and build, but the pricing was the best. I have a problem with tracking my belt, e-mauled the service group and got a very fast response and answer to the problem. A Great product and Great support. Next time I need something I’ll check out Triton first to see if they have what I’m looking for.

Sander Robert Meyer - 14/06/2019

Good quality sander. It is a well built product. It is very convenient to be using the spindle sander and you can quickly switch to the sanding belt.

Quality sander Ryan - 01/06/2019

This is such a great addition to my shop, it is the perfect sanding station for a small shop. I couldn't be any happier with it!

Awesome product! Kenneth Noyce - 31/05/2019

Really nice unit. Easy setup. Works well for my needs.

Nice tool Michael Stewart - 28/05/2019

I already have a belt/disc sander, but needed something that could sand the end grain of boards. I also needed to be able to sand the interior curves of projects, especially with some bandsaw boxes that I've been enjoying recently. Nice to have something that can do both with enough power and a small footprint. No complaints and it does exactly what I was after. Would definitely buy it again.

Just what I needed for sanding end grain and inner curves Mike Schienle - 28/05/2019

I had been looking for an oscillating sander for some time and decided to purchase the spindle and belt sander as it seemed to gIve me the most flexibility for my purpose. I have to say the machine has exceeded my expectation now that I’ve had a chance to use it in real-life situations. The simplicity of switching between spindle and belt sanding has greatly speeded up completion of my projects. I would certainly recommend this product to anyone looking for a useful and quality product.

Excellent machine Duncan Barbour - 21/05/2019

I really like the Oscillating Sander, so far it has been great. I mostly use the belt, but I definitely foresee some upcoming projects for the spindles.

Great tool Michael Stewart - 14/05/2019

Excellent performance and very effective dust extraction when connected.

Oscillating belt sander Adam Whitford - 11/02/2019

bji het opbergen van de schuurband viel het mij op dat deze los staat, ik heb dit verholpen door een bandje van de 2 draaiknopen van tafel te bevestigen .gebruiksaanwijzing is niet te lezen, voor de rest een schitterend machine

opbergvak schuurband g heindijk - 15/01/2019

The Oscillating Spindle & Belt Sander is a fantastic flexible tool in the hobby workshop. It is very easy shifting from the Spindle to the Belt Sander, and the dust extraction is perfect.

Fantastic flexible tool Ole Houtved Andersen - 10/01/2019

Un buen producto, muy satisfecho! Lastima que no tenga alguna medida de rodillo mas grande.

Casi perfecta! Joan Vilanova Carmaniu - 09/01/2019

Been waiting to treat myself to this amazing sander and it was definitely worth the wait. Allowed me to create some great gifts for my family - cheese boards, chopping boards & coasters. Large flat sanding area makes easy work of straight edges & the various bobbins get precise curves and perfectly round holes. Great value & great results.

Professional quality sander Ian Hufton - 01/01/2019

Wish I'd had one 10 years ago. Compact, sturdy and versatile, it has replaced 3 other machines in my workshop. I love the accessory storage freeing up cupboard space, the tilting table is a godsend for intarsia work and the efficient dust extraction saves cleaning the shed as often as I had to before. Love it.

TSPST450 charles hetherington - 24/12/2018

this sander is ideal for making walking handles saves a lot of time ,cannot fault it so far, highly recommend it

really good value arthur harbour - 17/12/2018

I'd been looking for a bench Sander for some time but other offerings struck me as a bit inflexible or expensive or both so I decided on this TSPST450 as it gives me a broad range of capabilities at a good price. Its not huge, doesn't make a lot of noise and has worked well on plastic and wood using a less aggressive grit paper than supplied - which seems a bit fierce for general work, but changing the belt and drums is easy so its no problem

Excellent Flexible Machine at a good price John C - 14/12/2018

Sturdy machine that does exactly what it says on the tin. Economical footprint for my small workshop, greatly helped by the on-board storage of spindles and belt when not in use. Tilting table especially useful for intarsia work, and range of spindles widens its range of uses. In all, a well thought out and designed machine that works well for the hobbyist, yet feels robust enough to handle trade duties.

Oscillating belt and spindle sander C hetherington - 10/12/2018

Generally a fantastic tool. Certainly a welcome addition to my workshop. The ability to store all the essential tooling on the machine is great (and inspires me to keep my shop organized as well;). The only thing which seems improvable is the sandpaper. It seems to slide over the wood rather than sand it away. But other than that I love this sander.

Sander review Mike Brogowski - 13/11/2018

Excellent machine, I was only going to but the oscillating spindle version but the deal at Yandles for the combined spindle and belt sander was too good to miss and I am so glad that I bought it. Does everything I need in one machine.

450W Oscillating Spindle & Belt Sander David Wicks - 06/11/2018

I was looking for a bobbin sander to carry out intricate sanding, but I then found out that there was another model that included a belt sander and an adjustable table. This obviously cost more, but it eliminated the need for another tool, therefore it was well worth it. To date I am very happy with it and it has performed the tasks I wanted it for and more.

Oscillating Spindle and belt Sander David Law - 06/11/2018

Very pleased. Works well. Value for money

Oscillating belt sander. Mr Dobie - 28/10/2018

Excellent tool. Easy sanding straight and curved wood edges. Works smouthly and accurate. Large working area on the table. Very good dust extracting system. The only negative was that the label in front was unstucked at the edges and had taken a U shape so it had to be removed to work. Service advise was very helpful and that means much for me.

Great Oscillating Spindle & Belt Sander Stelios Liepouris - 23/10/2018

You get a lot for the money. A good combination for us with limited space.

Affordable Belt Sander Claes Wassenius - 23/10/2018

One of my best tools!!!!

Very good. joergen bjarkam - 23/10/2018

Great, love it. 5 all the way

Oscillating sander David nightingale - 21/05/2018

I think as my skills improve and my designs more creative, this sander will become more valued in my shop. It operates smoothly and has a good amount of power for the task at hand.

So far so good! Mark D Cornelsen - 08/05/2018

Well made Product nice design all parts stored on board. Dose what it says on the tin

Belt/bobbin sander Steve Mumby - 07/05/2018

The Sander has features which far exceed others on the market for the price after seeing reviews online from youtubers and online articles I when for the Sander due to it not only being a spindle but also belt 2 in 1 in my books. The hard metal top and rigid plastic base are of good construction and have already taken a beating.

Fantastic Sander for the price Joshua Grice - 26/04/2018

The 450W Oscillating Spindle & Belt Sander works perfect. It was a good choice to purchase ths triton machine

Oscillating Spindle & Belt Sander Rob - 11/04/2018

It does what it's supposed to do, it sands things. I like the quick change from belt to drum and the adjustable table. Has a good speed and clear controls. Very satisfied with the tool.

Oscillation spindle & belt sander George Hawkins - 05/04/2018

So far I have only used it on one job, but it worked great that time. The dust collector works very well because I forgot to hook it up once during the job and there was sawdust all over the table versus when it was hooked up, the table was clean.

450W Oscillating Spindle & Belt Sander Philipp Schupp - 24/03/2018

Very easy to use and change the different the sanding belts.

Owner Jim Brown - 16/02/2018

Works when the tracking on the belt sander is set up and the spindle sander works great and I like there a space on the machine for all the spares and there's nothing really to set up out of the box.

Great Alex - 03/02/2018

Dans l'ensemble, je suis très satisfait des produits triton Pour le Workcenter,le système de module à interchanger est très pratique. Pendant les découpes avec la scie, la table ne bouge pas. Le module de défonceuse a été très bien pensé mais je regrette que les réglages n'aient pas été beaucoup plus détaillés dans la notice. Point noir aussi sur la Workcenter c'est que très souvent des boulon de défont Je dispose aussi de la laemelleuse qui est très précise. Je la recommande vivement. J'ai récemment acquis la TSPST450, je n'ai pas encore assez de recule dessus. Je vais bientôt m'acheter la scie plongeante. Je recommande cette marque

Avis sur les produits triton HOUEHANOU Fatiou - 02/02/2018

I am a retired Carpenter/Joiner and still do lots of work in my workshop as I am restoring the 200 year old property that I live in so there is a lot of detailed work to do in restoring and re making mouldings ext. I have found this machine to be a brilliant all rounder that can handle small and intricate shaping work but also be used as a linisher that will cope with heavier sanding and shaping tasks. The machine is well designend and well built and is light enough to carry or place on a bench so can be used on site or in the workshop. Replacement sanding belts and cilenders are not expensive and are widely available. The price point puts it in the range of not only the keen hobby woodworker but also will be an asset to the professional traidsperson

Top notch sanding system Craig Morris - 22/01/2018

Ich finde die Idee einen Spindel- und Bandschleifer zu kombinieren einfach genial! Leider ist die Umsetzung der Idee suboptimal. Leider ist die Maschine an einigen Stellen nicht ganz genau. Ich musste die erste Maschine die ich Bestellt habe zurück schicken. Der Bandschleifer-Aufsatz war bei der Maschine nicht Senkrecht zum Tisch und sogar, wenn ich den Schwenktisch so einstelle, dass 90° zwischen Tisch und Führungsrollen erreicht wird war die Metalplatte zwischen den Führungsrollen nicht senkrecht zum Tisch. Dazu war die Metallplatte nicht ganz flach, sondern irgendwie in der Mitte gewölbt. Bei der zweite Maschine ist es jetzt in Ordnung. Bei den beiden Maschinen rastet der 0–45° Einstellung nicht bei den angegebenen Neigungen und 45° ist gar nicht möglich, weil die Führungslöcher in den Tisch-Unterstell-Blechen zu kurz sind (man musste die ausschleifen um 45° Neigung einstellen zu können). Das ist für mich aber unkritisch weil ich nur senkrechte Fläche bearbeite. Insgesamt kann ich aber die Maschine empfehlen, angenommen man kein Montagstück bekommt bei dem Ausfertigungsqualität nicht stimmt.

Geniale Idee mit ein paar Umsetzungsmankos Adam Trendowicz - 16/01/2018

Ein super Gerät, jedoch könnte die Absaugung bei montiertem Bandschleifer besser funktionieren.

TSPST450 Oszillierender Band- und Spindelschleifer Manuel Eidenmüller - 15/01/2018

Ok, Noisy, poor quality control, problems with table not square to bobbin sander

TSPST450 450W Oscillating Spindle & Belt Sander John Ashby - 04/01/2018

I Like TSPST450 a lot, but I lost my smallest sleeve and do not know haw to get it. Bought my sander from eBay.

Lost my smallest sleeve Kristjan - 04/01/2018

Its ok but a pease of the cast sanding belt holder was broken off and the sanding paper from the bobbins comes off under slight pressure .. i couldnt be bothered to send back so ive fixed it my self ...other than that its working ok but only used it about 6 times so we will see

Not bad Edward learoyd - 20/12/2017

450W Oscillating Spindle & Belt Sander in quality tool with good price. Both, spindle and belt are good options and it's easy and fast to swap a tool.

450W Oscillating Spindle & Belt Sander review Kristjan Pärnamägi - 19/12/2017

Simple and easy to use. Excellent dust removal. Easily changed from belt to bobbin and back again. I absolutely love it.

Super sander Happier chappie - 04/12/2017

Great addition to my workshop. Much easier to achieve smooth edge / surface even at an angle.

Oscillating spindle and belt sander John pickering - 04/12/2017

I bought this a few weeks ago, and used it regularly since, I think it is a great machine, easy and quick to change sleeves and the sanding belt ,stable does not move on the bench, sleeves priced ok. Would definitely recommend

Sander Mr Williams - 02/12/2017

Very pleased with this machine. Easy to set up and works like a dream. Don’t know how I managed without one for so long. Also not too heavy to move. I am 67 year old woman and not very strong but had no difficulty moving/lifting this.

Good Machine Sheena Davies - 13/11/2017

mit Hilfe meines neuen Schleifgerätes werden aus sägerauen Rohlingen Handschmeichler

von sägerau nach glatt Günter Kacalek - 08/11/2017

Ein sehr gutes Gerät mit leichten Schwächen. Lediglich die Absaugung könnte etwas besser gelöst werden, da doch einiges rechts neben dem Gerät landet. Die Bandspannung ist sehr filigran einstellbar, erfordert allerdings etwas Geduld bis das Band nicht mehr wandert. Die Winkeleinstellung sind sehr genau gelöst. Alles in allem bin ich sehr zufrieden!

TSPST450 Oszillierender Band- und Spindelschleifer S. Mueller - 01/11/2017

Mám za sebou první pracovní zkušenost s tímto strojem a jsem velice spokojen. Mohu doporučit. I have the first work experience with this machine and I am very satisfied. I can recommend.

TSPST450 Roman - 05/10/2017

Never had a tool before, that‘s so perfect to me. I‘ll use it all the time and will never ever give it away!

Awesome sanding station Martin Krinninger - 20/08/2017

Great tool, I love to work with it

TSPST450 Martin Krinninger - 06/08/2017

Ich bin sehr begeistert von dem Gerät und bin sehr froh mir dieses Gerät für meine Werkstatt zugelegt zu haben. So habe ich einen Spindelschleifer und Bandschleifer in einem Gerät vereint. Für alle Anbauteile befindet sind an den Seiten ein Aufbewahrungsfach. Das Produkt ist sehr zu empfehlen

Super Maschine!!!! Robert - 25/07/2017