Ensambladora de espigas con potente motor de 710 W. Doble perforación de agujeros para juntas de espigas con espacios de 32 mm. Guía de taladrado ajustable de 0 a 90° para realizar gran variedad de juntas. Capacidad de perforación de 0 -38 mm. Mecanismo de ajuste de altura de piñón y cremallera. Tres líneas de corte para un acabado preciso. Pasadores de sujeción retráctiles para evitar el movimiento durante el corte. Incluye 2 brocas de Ø8 mm y bolsa de transporte resistente.
Bon produit ,permet de relier facilement deux planches grâce à des chevilles en bois. L'utilisation est simple et intuitive.la plongée dans le bois est un peu dure. Mais vu le prix ce produit est excellent.
Bon produit très pratiquefr&#233;d&#233;ric M. - 24/06/2018
I have found the dowel jointer to be effective for drilling paired holes for dowels. However the centring gauge for determining the centre of a work piece is difficult to adjust accurately. On the back side of the jointer is a machines pattern that one would assume is for an indexing ruler for making repeatable holes but no such accessory is available. I also had to redrill and taper the side mounted scale ruler in order to get an accurate reading it was off about 1mm. Generally I find the tool acceptable
Do well JointerMitchell Nimeck - 09/06/2018
work great but you have to hold it still till motor stops to avoid elongating your holes. this would work even better if it had an electric brake to stop it from spinning immediately instead of waiting 20-30 seconds after each cut.
works as advertisedCharles L. Ervin - 12/03/2018
It makes my woodwork easy to get sturdy joints, and I can get the job done quicker. I'm pleased with my purchase of this product.
710 Dowelling JointerMichael Duffy - 09/03/2018
Works as described. Must be sure to line up dowels perfectly.
710W Doweling JointerBruce Patrick - 29/12/2017
Very sturdy built tool, easy to center on drill points, easy adjusting for drill depth and dowel location, smooth operating
Dual Dowel JointerJerry Moore - 30/11/2017
I bought this machine for some framing work that I was doing. I didn't require the heft of a Mortice and Tenon yet needed something short of this. This machine proved perfect when you consider the cost of a domino or similar loose tenon jointer. It is very accurate and no vibration from the motor driving two drill bits also the face and fence parts move very tightly and are well machined. Overall I would highly recommend this machine for accuracy, ease of use and value for money
Nice tight accurate and refined tool for creating double dowell JointsPat Hynes - 29/08/2017
Overall not a bad machine, but be prepared to do some fettling to get it right. As supplied, the marker lines do not line up with the centreline if the drills, which leads to a 1-2 mm error in the joint.
That said, for the money it is a very good machine and well worth the effort required to get it right.
Good machineRoss - 22/07/2017
The Triton 710W Dowelling Jointer is proving to be an excellent purchase, a very well made precision jointer that I could not be without, I use this on a daily basis and it has never let me down, very easy to use and very easy and quick to swap over the drill bits, I am really pleased with my purchase.
710W Dowelling JointerJulian gardner - 12/07/2017
Excellent product. Very good value for money like all the triton tools. Be prepared to spend a bit of time getting the settings just right the first time, but after that, you're away.
Dowelling JointerRoss - 09/07/2017
I have been using the Duo dowell jointer for the last couple of weeks, I have had no issues with the product, it operates as it should producing accurate dowelling holes, the item also seems to be very well made and should last a long time, on top of this when registered to have a three year guarantee is peace of mind if any unlikely faults do occur, I would happy recommend this product .
Duo Dowell JointerJulian gardner - 28/06/2017
I used the tool on some test pieces. Was unsatisfied with the results. Joint was uneven due to the slop in the track that guided the drills. Also thought the spring on one side caused the tool to twist. Returned the tool to Rockler. Sorry, I really wanted this tool to make my work better.
My OpinionJohn McGonagle - 23/06/2017
So far I´ve been satisfied with dowelling jointer 710W, not least because the price is very reasonable.
JointerKeijo Kilpi&#228;inen - 17/06/2017
The dowelling jointer has met all my expectations. It has allowed me to drill straight, accurate holes for my dowels. I also had a situation where I lost one of the allen screws that hold the drill bits in place. The Triton support folks sent me 2 screws immediately. The combination of a great tool and terrific support is what I have come to expect and experience with Triton products.
dowelling jointerPeter Kosydar - 31/05/2017
VERY GOOD PIECE OF KIT TO HAVE WOULD RECOMEND IT TO ANYONE
DOWELLING JOINTERPHILIP DIXON - 01/08/2016
I own the TC500 DWL the older version of TJD 600 find it very good construction and very precise. The only draw back are the drilling bits don't stay sharp long on hard wood and don't think that can be sharpened.
TC500 DWLjoseph - 22/04/2012
Los clientes interesados en este producto, también han visto...