JOF 001

Défonceuse de précision compacte plongeante 1 010 W

Légère et compacte, cette défonceuse est idéale pour le travail à main levée. Le blocage automatique de l'arbre permet de changer rapidement de fraise et la poignée remontoir crémaillère permet un réglage précis de la hauteur en montage sur table. Fournie avec une fraise droite et une poignée remontoir.

Caractéristiques du produit

Les pinces de serrage 1/2", 6 mm et 12 mm permettent l'utilisation d'une grande variété de fraises
Le moteur de 1 010 W / 1,5 ch contrôlé électriquement permet d'obtenir une coupe précise
Le blocage automatique de l'arbre ne s'enclenche que si le cache de l’interrupteur est fermé
Le démarrage progressif et la vitesse variable procurent la vitesse parfaite pour tous les types de fraise
Le cache de sécurité de l'interrupteur se ferme lors d'un changement de fraise pour éviter le démarrage de la défonceuse
Le réglage micrométrique permet un réglage fin et continu de la profondeur sur toute la course de plongée
Le changement de fraise avec la seule clé en montage sur table s'effectue avec le blocage automatique de l'arbre
La vitesse contrôlée électroniquement assure une finition parfaite sur tous les matériaux
La tourelle graduée à 3 butées permet des coupes à des profondeurs prédéfinies précises
L'excellente extraction de la poussière procure un espace de travail plus sain et sûr
Le guide multi-fonctions procure un contrôle optimal en mode main libre et coupe circulaire
Les goupilles de montage rapide pour fixer et enlever la défonceuse rapidement du guide et du plateau de table Triton RTA300
Les aérations latérales réduisent l’accumulation de la poussière dans le boîtier du moteur lorsque la défonceuse est montée sur table
Le pare-éclat intégral procure un maximum de protection dans les zones de coupe et facilite l'extraction de la poussière
L'accès rapide aux balais de charbons permet de remplacer les balais usés

Caractéristiques techniques du produit

Réglage de la profondeur Plongée libre et réglage micrométrique
Contrôle électronique de la vitesse Oui
Guide Guide
Micro-réglage Infini
Vitesse à vide 21 000 min-1
Course de la plongée 0-59 mm
Puissance 1 010 W
Voyant d'alimentation Néon
Hauteur du produit 270 mm
Longueur du produit 162 mm
Poids du produit 5 kg
Largeur du produit 280 mm
Bouton d'arrêt d'urgence Oui
Puissance acoustique LW 100,8 dB
Pression acoustique LP 89,8 dB
Maintien de la vitesse sous charge 8 000 - 21 000 min-1
Contenu - 01 1 x Défonceuse de précision compacte plongeante 1 010 W
Contenu - 02 1 x Guide multifonction
Contenu - 03 1 x Clé à pince de serrage
Contenu - 04 1 x Extension de semelle
Contenu - 05 1 x Pince de serrage 1/2"
Contenu - 06 1 x Pince de serrage 12 mm
Contenu - 07 1 x Pince de serrage 6 mm
Contenu - 08 1 x Poignée remontoir crémaillère
Contenu - 09 1 x Manuel d'instructions
Contenu - 10 .

Accessoires fournis

Poignée remontoir crémaillère
Pince de serrage 1/2"
Pince de serrage 12 mm
Pince de serrage 6 mm
Guide multifonction
Clé à pince de serrage

Manuels

JOF 001


Compatible avec

TGA 250

Kit bagues de copiage, 12 pcs

Bagues de copiage usinées en laiton chromé et socles de guidage en acier chromé. Bagues de copiage avec trous d'aération pour extraction des poussières. Comprend 8 bagues de copiage (Ø externe 5/16", 3/8", 7/16”, 1/2", 5/8", 51/64", 3/4" et 30 mm), bague de centrage (adaptateur), entretoise de table et 2 vis M4.

En savoir plus
TRT A001

Adaptateur de rail de guidage pour défonceuse

Le plateau support chromé et les rails de guidage donnent une structure robuste lorsqu'ils sont combinés au plastique résistant aux chocs. Mécanisme de fixation rapide assurant un temps de fixation minimal et une simplicité de fixation sur les rails. Compatible avec l'ensemble de la gamme des défonceuses Triton.

En savoir plus
TWX7 RT001

Module table de défonceuse pour TWX7

Module table de défonceuse conçu spécialement pour le Workcentre TWX7. Compatible avec les défonceuses Triton (TRA001, MOF001 et JOF001) pour façonner, raboter, rainurer, créer des moulures et des encoches. Guide principal et guides latéraux en aluminium extrudé avec micro réglages et entretoises rotatives, protections multipositions et tubulure d'extraction des poussières. Comporte des peignes horizontaux (2) et verticaux (2) à installation rapide. Assemblage et configuration faciles. Associé au Workcentre TWX7, il permet d'obtenir une vraie table pour défonceuse pour des résultats professionnels. Matériaux et composants haute qualité assurant une longue durée de vie. Peut être complété avec divers accessoires proposés en option pour encore plus de fonctionnalités.

En savoir plus
DCA 300

Collecteur de sciures, 23 L

Permet d'éviter l'accumulation de sciure et l'engorgement de l'aspirateur. Fournit une capacité de 23 litres. Facile à manier et à vider. Construction en plastique rigide. Convient à la plupart des produits comportant une sortie d'extraction de la poussière.

En savoir plus
FJA 300

Dispositif d'assemblage à queues droites

S'adapte directement sur le plateau de table Triton pour défonceuse pour créer rapidement et facilement des queues droites de 1/4” et 1/2” précises et décoratives dans des plaques de bois d'épaisseur comprise entre 3 et 32 mm. Coupe simultanément plusieurs assemblages. A utiliser avec le plateau de table Triton RTA300 pour défonceuse.

En savoir plus
AJA 150

Ensemble de montage surélevé

Plaque coulissante pour défonceuse pour fraisage au-dessus du plan de travail du Workcentre. S'adapte aussi à la plupart des scies sauteuses pour utilisation avec les modèles plus anciens de tables pour défonceuse Triton (fabriquées avant RTA300). Procure une haute précision pour créer étagères, rayonnages, placards, armoires sur mesure, meubles encastrés, etc. Construction en acier robuste.

En savoir plus

Commentaires

{{resourceStrings.Page_Support_ProductRegistration_Successful}}
60 Review(s)
I use several routers professionally by various major manufacturers this one compares favourably. Firstly the excellent safety features such as when changing a bit you can’t switch it on exactly how a potentially dangerous tool should be made. Nicely balanced, decent dust extraction easy to fit in a bench with the excellent height adjust handle. All in all an extremely well thought out versatile router

Brilliant Steve Henderson - 31/01/2019

Even though this is the baby of the bunch it is well powerful enough to chomp through whatever I have been working on whether oak through to mdf. The weight is good so you don’t feel like your using a toy, the build is excellent and the ease of set up results in clean, accurate cuts. All in all an excellent machine well worth the money and I would recommend this to anyone wanting to produce top quality work.

Excellent Router Jonathan Mander - 29/01/2019

All routers should be built this way. Tis is built to last. Also the fact that it can take multiple shank sizes is very useful. I have nothing bad to say about this product

An excellent machine Tony Durrant - 05/01/2019

Matériel au top ..!! Merci pour le service rapide ..

Défonceuse TRITON Le Sant Bruno - 02/12/2018

great router, very light compared to my last router. only done a few light jobs with it but so far its great. really enjoy using it. easy to set up and looking forward to using it in the work centre when I can afford one !!

very compact daniel long - 26/10/2018

"Kleine" leistungsstarke Oberfräse. Habe mir die Triton JOF001 für die Untertischmontage gekauft und bin rundum zufrieden. Mit ihren 1010 Watt fräst die Oberfräse problemlos auch Hartholz. Nur die Kurbel ist etwas wackelig.

Super ! Wolfgang S. - 23/10/2018

Very smart, very high quality, very easy to use, very precision, and "many, many... very yet". :):) Definitelly it's PROBABILITY THE BEST ROUTER IN THE WORLD (It is no joke).

Excellent Router Maciej Grabowski - 19/06/2018

Purchased primarily for use in a router table and could not be happier. The innovative “above the table” single spanner bit change with the automatic spindle lock facility is a godsend and a considerable time saver. Coupled with the automatic power lock action and the above table winder the Triton router ticks all the boxes. In use I have found the router to perform flawlessly. The soft start and electronic speed control add to the performance and I have also found the router to be quieter (in relative terms) than expected. All in all I am very pleased with the purchase and would suggest anyone in the market for a router, particularly for use in a router table, check out the Triton Range.

Triton JOF 001 Comact Router Mike Selby - 16/05/2018

This router is working brilliantly, hand radiusing a table top was relatively easy. Obviously using a template and guide bush would have made it easier. Still very pleased with the outcome and ease of depth control. Thoroughly recommend this product.

Plunge Router Stuart Parley - 18/04/2018

As a keen DIYer and hobbyist, this router is perfect. From the packaging to performance there is a quality feel that inspires confidence of a quality product. The ability to adjust the depth from above the workbench when mounted as a table router is a real bonus. Only having one router, the method of mounting to under table from hand held and visa versa is a breeze and negates the need to get a 2nd one. Several parts stockists around should the need arise. Fantastic piece of kit, would highly recommend.

Brilliant Adrian C. - 06/03/2018

I just bought my second Router; this time a "Triton" and have found it to be easy to handle and well made machine, the excellent quality of the Router can be immediately seen. The design has been made by engineers that know what is required by DIY and professionals.

Quality Des Rogers - 22/02/2018

Pretty pleased with tool, good value, only slight negative is the plunge operation only works if you push down on one side of the tool i

jof001 Mike Gresham - 20/02/2018

This has to be the best bit of kit I have ever bought

Amazing Phillip Harris - 12/02/2018

i purchased the 1010w precision plunge router around Christmas time after looking at various models from the different manufacturers on the market I made my decision to purchase it on the grounds that it seemed to be well designed and constructed, with a look of robustness. it came with a wealth of accessories with more that may also be purchased at some point in the future. The number of excellent write-ups and reviews in various publications shows that a considerable amount of woodworkers both professional and amateur seem to agree that this router is a quality piece of kit!

more for your monry andy rushton - 29/01/2018

l now own 4 routers all with different manufacturers (Bosch, Trend, performance power,Triton) out of all of them the Triton is by far the best to work with,it handles better than the rest even though it is not the most expensive of the 4 I only have praise for the router I purchased a thickness planer by Triton and only have good things to say about that to.i would like to commend Triton for what in my opinion are quality tools.

Buy faf the best for the cost. andy rushton - 15/01/2018

Awesome bit of kit. Very precise and easy to use, I have mine mounted in a router table and the height adjustment is a brilliant feature. Auto lock for changing bits is very clever. Best router I have ever used.

Awesome Johnny Timmins - 05/12/2017

At the smaller end of the Triton router range I wasn't expecting a great deal of power but this thing has it in abundance. Its done everything I have asked of it. I haven't given it 5 stars as some of the screws were loose causing the depth stop and lock to come adrift

Triton 1010w Router Steve Harvey - 15/11/2017

This is my second router but this is far more substantive. You can feel the quality the moment you pick it up. |I have mine table mounted so the addition of being able to adjust from above the table is a real plus for me. Highly recommended only downside was that it never came with an 8mm collet. 5 stars

jof001 router paul lightfoot - 13/11/2017

This is my second router as my first cheap brand one expired. I learnt the hard way by buying cheap and not having the quality of this new Triton. You can feel the build quality as soon as you pick it up. The real big plus point with this is on the router table with easy to use height adjustment right through the range. 5 stars.

Triton router jof001 paul lightfoot - 09/11/2017

I bought this router to fit to my RTA300 table. I had been using a Freud 2000 but found lots of problems with bit changing, Height adjustments and the method of attachment to the table insert. All of these problems have been solved with the Triton Router; It may not have the same power rating as the Freud but I found this particular model quite adequate for my Hobby pursuits.

A Great Router Thomas Armstrong - 07/11/2017

I purchased the Triton router after reading a lot of good reviews. The routers features and power are ideal for what I wanted however I was a little disappointed that on the first use most of the crews became loose and fell and some fell out. I had to stop what I was doing and tighten up all the screws on the router that were loose

Router Review steve - 01/11/2017

It looks and feels like a good piece of kit. It works like a good piece of kit. Only niggle was it was stiff on the plunge. It needed a spray of release oil and then an accurate downward push.

Router does the job Bill Brown - 07/10/2017

Works well from the get go. However the plunge action is very stiff and needs lubrication. Once lubricated it works well (lubrication and dust?) Maybe a minor niggle but essential that the action has to be free and dependable.

Plunge router Bill - 24/09/2017

Bonne prise en main, qualité des éléments qui la composent, travail pro et finition avec des détails qui ne sont pas présents que dans des défonceuses beaucoup plus chères. Je suis très content de mon achat au point d'en avoir deux, une sur table et un autre pour le travail à main levée.

Défonceuse triton JOF 001 GARCIA REPULLO, MANUEL - 30/08/2017

Bonne machine, très pratique à utilisé

Très bon produit Kennel Thierry - 25/07/2017

I bought this router for three main reasons - the built in winder mechanism that lifts or lowers the router when fixed under the router table, the ability to change router bits from above and the apparent ease with which the router can be removed from this position for hand routing. The winder is a really neat way to avoid all those expensive lifting devices and it is very effective. The third benefit really needs one of Triton’s router tables, because it is a bit of a fiddle using the xxxx plate that is intended for routing circles or steadying the router when near an edge. This is a large piece of kit and a recess needs to be routed on the underside of the table to both locate the plate and to enable the collet to be raised to a sufficient height to change the bit from above. So, if you are have your own router table you need to recess the plate or have a sufficiently large opening in the top of the table to provide purchase on the collet. The ideal solution is to get the TWX7 workcentre with the router table module, but these two will cost about £400 upwards. The router itself is the smallest of the three made by Triton at 1010 watts. Although this may sound like a lightweight, it performs like a middleweight. The machine feels very smooth and willing and the only drawback is the depth adjuster used when hand routing. There is a spring loaded shaft that can be zeroed on one of the three turrets, then lifted and then engaged on a second turret. This has a fine adjustment wheel which works very well, but getting hold of the shaft which contains a strong spring and then lifting it while the turrets are changed is fiddly and frustrating. Overall the router design has taken into account some of the standard router deficiencies and come up with some innovative solutions. For the price it represent excellent value for money and so far the only problems are more to do with my failings in knowing how to rout a large recess and operate the depth adjustment.

Triton JF001 Router David Hemmings - 03/06/2017

I was given an old cheap router which didn't work very well, however it introduced me to the world of Routing and what is possible with a router. So my search for a new router was on and I wanted it to be suitable for router table use as well. I read as many reviews as I could and watched several youtube reviews of routers and I was impressed with what I saw of the Triton's. I decided to make the purchase of a Triton JOF001 as I have limited funds and I do not regret it one bit, this router feels like a premium product, yet it hasn't destroyed my bank balance. I intend to spend a lot of time with this router testing out its functionality and when I get round to it, I will look at building myself a router table because this comes with the tools that enable you to easily turn this over and adjust the cutting height very easily! A very impressive product which I am even more pleased with than I thought I would be. Well done Triton.

Beginners Router Phil Sexton - 03/05/2017

I am the current owner of the TRA001B 2400W router but was beginning to find it rather heavy for hand held work especially for use on the Leigh 12" superjig. As I already recognized the quality of the Triton product it took me no time to decide to purchase this smaller Plunge Router. And I haven't been disapointed. It has provved to be a wonderful and much lighter router to use as a hand held unit and with it I can now leave the larger unit mounted on my router table.

Great hand Held Router Stephen Knight - 18/04/2017

Bought this router to put in the new Triton router table which I bought. I have to say that after using by hand and in the router table it is the best bit of kit I've used. It is comfortable, precise and powerful enough to do any job. I like it so much I will be buying the two larger versions. I would not hesitate to recommend this to anyone. I will only usually leave reviews on tools I would recommend to my friends and this ticks all the boxes. Packed full of features that you would normally associate with routers at three times the price, so at this price it is brilliant.

1010watt compact precision router Andrew self - 28/03/2017

Purchased to replace my old ( NOT Triton ) router that had seized. Very nice to include three collets but had to purchase the 1/4" one separately as I have a number of bits with that shank. Works very well, as I expected as I have it's big brother in my Triton Router table. Much easier to change bits with the Triton than the types where you have to use the spanner between the router body and base. I like the depth limiter as well, easier to set than other types. Very good dust collection when connected to my vacuum system.

Plunge router Nigel Wakefield - 23/03/2017

A very solid, well engineered, powerful router. What I really like is the thoughtful design, the ease of changing cutters, the safety interlock with the on/off switch, that the router is intended to be used table mounted as well as freehand. The height adjusting handle for use when table mounted makes life so much easier. Also, the plunge lock, the on/off switch and the speed control are to hand when in the table. My router will be permanently table mounted to act as a spindle moulder. The JOF001 has quick-release fasteners to mount to a Triton table, but I had difficulties fitting it to my Rutlands Xact table. With the sole plate removed, there are a number of threaded screw holes for fixing to a phenolic plate. Unfortunately, however the router is positioned, one screw hole is always too close to the removable concentric rings in the plate. I solved this by using the quick-release holes and countersunk 6mm setscrews.

Triton JOF001 Router Nigel Wild - 22/03/2017

fine tool, metric thread holes may be added to bottom plate for ease of customization in metric world

jof001 Zlatko Ivanagic - 07/03/2017

there could be metric screw mounting points set next to the default ones, on local market i have much bigger choice of those.. btw what is the single metric thread on the baseplate for? (which gave me idea)

JOF001 Zlatko IVanagic - 21/02/2017

Really good quality for this price. With all accessory. What else can you ask ?

Excellent Jerome - 18/02/2017

Out of the box it looks and feels great, and it is great it's style and handling just makes you want to use it. It has two great features that I love 1, the through table depth setting 2,the quick fiting mechanism to the baseplate that can be used to fit the router under a router table. Im a Happy man. Ps. would have liked a 1/4" collet instead of the 6mm.

Happy router man Norman - 04/02/2017

Just recently the old router in my router4 expired, after searching the internet and comparing features I settled on a Triton. Since fitting it I have used it extensively and am very pleased with my purchase. No more lifting out to change bits, just wind it up, auto locking, just one spanner. The micro adjustment makes setting depth easy and accurate. The locking lever, micro adjuster, speed control and on/off switch are all well placed for table use.

rob s Robert Schulz - 25/11/2016

Purchased this router about a month ago. So far it has been a breeze to use. Used to make raised panel doors with ease. I mounted it onto a router table and once it was all dialled and plugged in i was ready to go. The through table plunge winder was such a awesome feature to have, as i was able to quite easity adjust my depth height when cutting the tongues. This enabled me to be accurate everytime and the result was that i achieved perfect fitting joints everytime.

Triton JOF001 Mathew Summers - 14/11/2016

Very pleased with this purchase. It has a smooth plunge and the router is neither heavy nor too light. Love the safety cover over the starting switch. Also has a guide to make circles. Very well please with my first router.

Compact Precision Plunge Router 1010W JOF001 Maria Spiteri - 19/09/2016

Im very satisfied with the router. Compared to the other routers you can buy like Bosch or metabo, Triton is less expensiv and the design convinced me. Im using the Router very often and i like the possibility to use as table router with an selfbuild table.

Perfect Router Sebastian Giese - 04/08/2016

Je l'utilise depuis peu mais je suis pour l'instant pleinement satisfait de cette defonceuse. Bonne ergonomie, pas trop bruyante.

Très bien Charles - 01/08/2016

Automatic spindle lock, Safety switch shutter, Perfect for Router Table - Great router -

plantaga Volker Morlath - 30/07/2016

Bonne impression pour le peu dont j'en ai fait usage.

Pratique Xavier - 27/07/2016

Je l'utilise depuis 1 an et rien ne lui résiste. Très polyvalente, le meilleur rapport qualité/prix de sa catégorie ! I use it for 1 year and nothing can resist it. Very versatile, best quality / price ratio in its class!

Excellent router / Excellente fraiseuse ! steph - 27/07/2016

This router is well designed. It produces great results. The finetuning is excellent. Especially when mounted under a routing table it proves to be easy to work with. I am very pleased to have bought this router.

Great machine Rene - 26/07/2016

i like it i am a hobbyist, for me it s a great tool not too expensive and also good quality very very good for me !

VERY GOOD william - 26/07/2016

I am very pleased with this router, build quality is excellent and its even more powerful than I hoped for. I am using it in my router table, love the integrated bit hight adjustment.

Excellent David Lindh - 26/07/2016

This is generally a good router. I really like the way the collet is locked when changing cutters. It makes that task much easier. I have had to return my router for a warranty repair as the fine adjustment stopped working. The router was repaired and returned in good time. One annoying thing is the clear plastic guards that surround the moving parts of the router. At first they seem like a good idea until you want to use a guide bush that is smaller than the diameter of the collet. You then find that because you can't plunge the collet through the guide bush that you need to remove the guards to tighten the collet up on the cutter or centring cone. I took them off and put them back on a couple of times before getting bored with it and leaving them off. Whoever designed this router obviously never used a router with a guide bush before. Otherwise it a reasonable bit of kit.

Generally good but some bugs. Brian Ward - 25/07/2016

This router has a good strong motor. It’s very easy to adjust and bit change is fantastic. Plunging isn’t very smooth and its very hard to look through the plastic guard. There for I primarily use this router for jigs and such as it’s difficult to work free hand.

great value for money Dave Baumann - 25/07/2016

Using it for pine-based woodworking, works like a charm and precision Planning for a table-mount project which was the initial reason for selecting this model

Excellent price/performance ratio Philippe Dufour - 25/07/2016

Brought this router to fit my home made router/assembly table. Being the wrong side of 75, I did not want to scrabble under the table to adjust the depth of cut. It works well. I also made my own plate to fit the router to the table. It was not worth paying for one.

JOF001 plunging router John White - 25/07/2016

I've used this for some months now and it's never let me down! Very precise work. Is easier to change bits than in other machines.

Excellent router Harry Besseling - 25/07/2016

Good router manager to do decorative T&g rail and stiles in 19mm oak

Router review Daniel simmonds - 25/07/2016

Excellente machine ne ralentit pour ainsi dire pas même en travaillant avec des fraises 1/2" de fort diamètre. pas encore essayé sous table mais ça ne saurait tarder. Fournie avec pince 1/2" 12mm et 6mm. dommage j'aurais aimé vu la grande diversité des fraises avoir d'origine une pince 8mm.

Excellente défonceuse Alain Vincke - 25/07/2016

Après presque 1 ans d'utilisation, la JOF001 est top! Très maniable, réglage facile et précis, suffisamment puissante pour mon utilisation et robuste. Petite suggestion à Triton: dommage qu'il n'y a pas de boîte de rangement livré avec. Je recommande la marque!

Facile d'utilisation et robuste. Sebastien - 25/07/2016

From day one it wasn't easy to handle this router because you have to press down really hard. While pressing, the spring is squeaking. I had this problem with two machines.

Mid range performer Alessandro - 25/07/2016

I am wery happy with my JOF001. I use it in a Kreg router table and it is quiet, precice and easy to adjust. The spindle locks automatically when the router is lifted to change the bit and the winder has a long shaft so that you can make adjustments without the fence being in the way. The chuck holds the bit firmly in place but also releases it easily when you need to change it. Overall I am very happy with it.

Great router Marius Berg - 25/07/2016

Couldn't ask for a more accurate and precise machine.

Absolutely brilliant Ben - 25/07/2016

Very good price/quality ratio.. Fast bit change and accurate fine tuning are great

Great router Atte - 25/07/2016

Powerful enough, maniable, pretty tough, and usable in a large variety of works. Plunge has never been really smooth tough, wich affect precision...

Good router JVDB - 25/07/2016

Took me a long time to choose my first router but really glad I decided to buy this one. Very powerful, easy bit change, and is quite light making it easy to manoeuvre.

Great router reg1956 - 11/10/2013