TTS 1400

Scie plongeante 1 400 W

Le blocage facile de l'arbre permet de changer la lame rapidement. La sécurité d'utilisation est renforcée avec le verrouillage du mode plongeant. Poignées caoutchoutées. S'adapte sans difficulté au rail de guidage pour procurer des coupes droites ou en biseau régulières et précises. Clé de changement de lame intégrée. Démarrage progressif et régulateur de vitesse. Angle de biseau de 0° à 48°.

Caractéristiques du produit

Le sélecteur de mode permet de passer rapidement d'un mode à l'autre : plongée libre, précoupe ou changement de lame
Le mode précoupe permet d'éviter que le matériau ne se fende ou n'éclate
Le remplacement facile des balais de charbon accroît la durée de vie de l'appareil
Le réglage du biseau procure des coupes biseautées précises entre 0 et 48°
Les deux quadrants en biseaux procurent la stabilité utile pour une coupe précise
Vitesse variable, démarrage progressif et vitesse constante sous charge pour des conditions optimales de coupe quel que soit le matériau
Les taquets de réglage fin permettent de réduire le jeu entre le rail et la scie pour assurer une coupe précise
La sécurité anti-rebond permet d'éviter à la scie de se cabrer lors des coupes plongeantes
La fixation du rail de guidage augmente la stabilité lors des coupes biseautées
La profondeur de coupe est réglable en toute précision jusqu’à 54 mm
Les indicateurs de largeur de coupe permettent de placer précisément la lame sur la pièce
Le changement facile de lame se fait rapidement à travers le carter
Extraction hautement efficace de la poussière par un adaptateur universel et une sortie rotative sur 360°
Le mode changement de lame et le verrouillage de l’interrupteur permettent de changer la lame en toute sécurité
Le verrouillage du mode plongeant bloque la lame à l’intérieur du carter lorsque la scie n’est pas utilisée
La poignée antidérapante en caoutchouc surmoulé procure une maîtrise, une maniabilité et une sécurité renforcées

Caractéristiques techniques du produit

Plage de l'angle de biseau 0 - 48°
Diamètre de la lame 165 mm
Type de lame 60 dents, carbure de tungstène
Diamètre de l'alésage 20 mm
Contrôle électronique de la vitesse Oui
Matériau - construction primaire Aluminium
Vitesse à vide 2 000 - 5 000 tr/min
Puissance 1 400 W
Hauteur du produit 250 mm
Longueur du produit 340 mm
Poids du produit 5,4 kg
Largeur du produit 230 mm
Puissance acoustique LW 104.87 dB(A), KWA=3 dB(A)
Pression acoustique LP 93.87 dB(A), KpA= 3 dB(A)
Contenu - 1 1 x scie plongeante 1 400 W
Contenu - 2 1 x balais de charbon (paire)
Contenu - 3 1 x adaptateur universel pour système d'extraction
Contenu - 4 1 x manuel d'instructions

Manuels

TTS 1400


Compatible avec

TTS TP

Kit rails et raccords

Paire de rails de 700 mm de longueur, fournie avec une paire de raccords pour l'assemblage. Conçus pour la scie plongeante Triton TTS1400.

En savoir plus
TTS T1500

Rail

Rail de 1500 mm de longueur (59"). Conçu pour la scie plongeante Triton TTS1400. Compatible avec les scies plongeantes Festool et Makita.

En savoir plus
TTS TC

Connecteurs de rails

Paire de connecteurs de rails pour augmenter la longueur totale du rail. Compatible avec la scie circulaire plongeante Triton TTS1400.

En savoir plus
TTS 60T

Lame pour scie plongeante 60 dents

Lame en carbure de tungstène pour la scie plongeante TTS1400.

En savoir plus
TTS TS

Équerre en T

Pour des coupes parfaites à angle droit. Conçue pour la scie plongeante Triton TTS1400. Compatible avec les rails DeWalt, Festool et Makita. Le rapporteur prend 140 mm de la longueur du rail, avec ou sans serre-joint.

En savoir plus
TTS AG

Guide d'angle

Configuration rapide et facile pour réaliser des coupes obliques de précision dans une plage d'angles de +/- 55°. Conçu pour la scie plongeante Triton TTS1400. Important : le rapporteur prend plus de 140 mm de la longueur du rail, avec ou sans serre-joint.

En savoir plus
TTS WC

Serre-joints

Paire de serre-joints servant à fixer le rail sur la pièce à couper. Conçus pour la scie plongeante Triton TTS1400 de 1400 W. Chaque serre-joint prend 25 mm de la longueur du rail.

En savoir plus
TTS DES

Dispositif d'extraction des poussières

Système semi-rigide d'extraction des poussières d'une capacité de 1000 ml. Conçu pour la scie plongeante Triton TTS1400. Matériau non tissé à haute capacité filtrante. Fenêtre de visualisation du niveau de remplissage.

En savoir plus
TTS SB

Sac de rangement pour scie plongeante

Sac de rangement conçu pour la scie plongeante TTS1400.

En savoir plus
TTS CB700

Housse en toile pour rail 700 mm

Housse en toile pour transporter le rail de 700 mm

En savoir plus
TTS CB1500

Housse en toile pour rail 1500 mm

Sac en toile pour transporter le rail de 1500 mm

En savoir plus
TTS PG

Guide parallèle

Guide parallèle latéral permettant de guider la scie sur la pièce à couper. Pour un positionnement optimal de la scie et une avancée constante et fluide durant toute l'opération de coupe. Conçu pour la scie plongeante Triton TTS1400. Longueur : 315 mm.

En savoir plus

{0} avis

{{resourceStrings.Page_Support_ProductRegistration_Successful}}
28 Review(s)
Ho acquistato questa circolare perché avevo bisogno di qualcosa di pratico e funzionale, a causa del poco spazio nel mio laboratorio, in cui non uso attrezzi stazionari. Molto pratica e funzionale perché utilizzando le piste e altri accessori riesco ad avere tutte le lavorazioni che avrei con una troncatrice o banco sega. Sono molto soddisfatto del mio acquisto.

Triton tts1400 Federico - 10/07/2018

Works well for the price but I do not like the plastic depth guage design. I would like to see the depth guage function a little better. If you want plan on using a track saw as a professional, you might look at other options.

Great value Chris - 08/05/2018

I cannot say enough good things about the service I received from Debbie Long with Toolstream USA out of Charlotte, NC. I had a motor go out on a 1400 Plunge saw just weeks before the warranty deadline. They took my saw and communicated all their efforts to repair the motor. Within a couple of days they concluded the motor was not going to be repaired and replaced the entire saw. Andy Venable Knoxville, TN

returned my 3 year old saw Andrew Venable - 21/02/2018

I've used the saw for approx 2 months now and I have to say the results are really good. Firstly the build quality is excellent, the plunge action is very smooth. I've used the FT saw and this is an excellent saw to compare, especially considering the cost. Negatives, saw blade quality could be a little better, dust extraction at the front end could be better, and the kick back function can be frustrating. All in all this is a great bit of kit and couldn't recommend it highly enough.

Awesome piece of kit Nick O'Donoghue - 20/02/2018

Nachdem meine alte Säge nicht mehr funktionierte, habe ich eine Triton TTS1400 mit einigem Zubehör als Ersatz angeschafft. Der erste Eindruck ist sehr positiv, der Winkel-Anschlag hilft beim raschen ablängen, die Schiene bietet einen Rückschlagschutz und die Zwingen sichern die Schiene gut gegen verrutschen. Ich bin zufrieden :-).

Neue Handkreissäge Andreas - 07/01/2018

All the features of more expensive saws, easy to adjust for different stock. No more moving sheet stock, no second cuts through the table saw. Laser accurate cuts, easy set up clamping system. Love it.

owner David Smith - 14/12/2017

Excellent tool

Plunge Saw Norman Scott - 05/12/2017

I am a professional wood worker and used the TTS 1400 to cut various thickness sheet stock. It took a little getting used to, but once I was familiar with set up I found it saved me a lot of time and effort. No more over cutting then running through the table saw for finish cut. Laser accurate cuts, every time. A great quality tool with all the features of other more expensive models.

TTS 1400 David Smith - 29/11/2017

Only used a few times so far, but I don't think I made a mistake in buying it.

Track saw Jeff Patro - 11/11/2017

I am pleased with the performance of the 1400W Plunge Track Saw. It has done a good job on plywood and hardboard. My complaint is the poor instructions. The manual does not describe the proper sequence to start the motor and does not describe the depth adjustment for with and without the track. I would give it 5 stars if the manual was better.

Track Saw does the job Walter Ballard - 30/10/2017

The saw leaves a nice finish to the cut. I find the depth stop scale to be off a bit and I wish it got more of the sawdust when connected to a dust collection system, perhaps it needs the large window for changing the blade sealed. I really dislike having to press the anti-kickback lever when engaging the saw onto the track and this also is a problem if you have to back the saw up in a cut because of binding or some other reason. A riving knife would be safer and easier to use.

Nice finish Jay - 24/10/2017

Well made, easy to use.

Track saw Irene - 23/09/2017

Excellent matériel ! Que dire de plus sinon PARFAIT !!!

SUPER ! Lequesne Jean-Claude - 17/09/2017

Super! En rapport qualité/prix, que dire d'autre que SUPER ! Je recommande !!!!

Super Lequesne Jean-Claude - 02/09/2017

It is not very accurate when you connect two short track together.

The problem of track Yi Zhang - 26/08/2017

Ich habe gestern die Maschine zum erstenmal benutzt und bin sehr zufrieden.

Hobby-Handwerker Karl-Heinz Gottwald - 05/07/2017

Purchased this track saw as a kit including clamps and bag and two 29" tracks etc, first impressions were pleasing cutting cleanly, it took a little time getting used to the slow soft start (compared to my other saws) but it got the job done well and accurately, I find the clamps very handy when doing long cuts, to this end I purchased the 1500mm track and extra rail joints. Very good value and will no doubt work as well as my other triton tools for many years.

Great track saw at sensible money.. Graham Alexander - 20/05/2017

Je suis très content de mon achat outils très qualitatifs très bonne finition très grand precision je recommande vivement

État : Nouveau produit Scie circulaire plongeante D. 165 mm 230 V 1400W Come - 17/05/2017

As with many home woodworking shops, space is a real issue - probably the biggest issue! My little 12'x 16' shop had no room to break down 4'x8' plywood and my saw only has a 25" rip capacity. Consequently, I was forced to rely on the cutting station at the local "big box store" with their out of square fences and dull blades that make a cut that looks like it was done with a meat axe. I bought the Triton 1400 track saw and two lengths of track a couple of months ago and I'm in heaven - Beautiful straight, clean cuts with no "chatter" or tear out. The set up time and learning curve was minimal. I have now built a pull down vertical panel cutting rack that hangs from the ceiling when not in use. Though you need to purchase the track clamps, the TTS1400 works perfectly in the vertical orientation as well. Great Addition To My Shop!!

TTS1400 - An Awesome Addition To a Small Workshop Michael Thompson - 01/05/2017

This saw works as expected. Clean easy cuts. Just the thing for small shops blanking sheet goods.

Track saw smiles Allen Culuris - 27/02/2017

The Triton track saw I definitely worth it if your on a budget. It has a lot of good features. And great track. The only con I've found is that the anti kickback knob is a bit annoying to deal with when making a shallow kerf cut. But I can live with it.

Best track saw for my budget Ozzy Deschapell - 22/02/2017

Have used my new track saw for a couple small projects. I am very impressed with the quality of cuts this saw makes. I fell it makes better cuts than my expensive table saw. I plan on using my Trit on track saw for many projects.

Tra k saw Andre Faucher - 27/01/2017

I had been looking for good track saw within my budget for some time. Having looked at the other brands they all seem to have sinilar features with significantly differing price tags. I was impressed with the super-jaws i bought some time ago so gave a look at the Triton track saw. Very impressed. Smooth in operation solidly built and quieter than expected. After a few minutes getting used to its operation and features was ready to cut that first cut. Since perfect accurate cuts to my lines every time. Finish left is good too. Definately reccomend.

Track saw Kevin James - 14/11/2016

A track saw has always been on my list of tools to buy, as I work with sheets of ply often and they are hard to drop over a table saw even with a sliding table attachment. The cuts are crisp and its so easy to get perfectly parallel cuts. This works large blanks and sheet good so easily that a new world of wood working possibilities is opening up to me . I don't know how I managed without this saw. A definite must for every workshop, shed or garage.

a cut above caleb - 13/10/2016

Very good saw. Does everything I need , everything I expected and does it as well as my neighbors Festool track saw. At less than half the price! Very happy with this purchase. Chuck

Track Saw Charles Keefer - 26/09/2016

Purchased 1400W track saw, the saw worked to my satisfaction and has some nice features. I did have a problem with the 27" tracks, the ends were not square. Contacted cust. serv. and they were understanding and sent me a replacement set. As of now I have not had a chance to use the new set, hopefully they are OK.

Jerry Gerald Blevens - 03/09/2016

I reviewed several track saws on line and got them down to two. A visit to my local Rockler store helped me decide. Price and options won out with my Triton TTS1400. It's closest competition was Dewalt. Having short tracks I can do smaller pieces or connect for longer boards was a main advantage. Locking on track to prevent kickback and angles is great also. The only thing missing would be a riving knife.

After careful review, Triton won out Mark Barber - 01/08/2016

I am honestly at a loss as to how I managed before purchasing this saw. Perfectly straight and parallel cuts used to be difficult to achieve, but are now a snap. This product has now replaced my table saw for the vast majority of tasks. Great stuff, Triton!

A Revelation Marc Jennings - 01/08/2016