TTS 1400

Invalcirkelzaag, 1400 W

Invalcirkelzaag met gemakkelijk te verwisselen zaagblad. De zaag is voorzien van een invalvergrendeling, soft-grip handvaten en aan-boord accessoire opslag. Te gebruiken op een geleiderails voor lange, nauwkeurige zaagsneden. Variabele en constante snelheid met zachte start. Verstekbereik 0-48°.

Product eigenschappen

De functie selectiehendel maakt het schakelen tussen de verschillende zaagfuncties erg snel en gemakkelijk
De krasfunctie voorkomt splinters en scheuren in het hout
De snel verwisselbare koolstofborstels verlengen de gebruiksduur van de machine
Nauwkeurige versteksnede in een hoek van 0 tot 48º
De verstek tandbogen zorgen voor stabiliteit en nauwkeurige zaagresultaten
De variabele snelheid, zachte start en aanhoudende snelheidselektronica optimaliseren de zaagomstandigheden voor elk materiaal
De fijn-verstelknoppen zorgen voor een goede pasvorm van de zaag op de rails voor perfecte zaagresultaten
De antiterugslag veiligheidseigenschap voorkomt het schokken van de zaag bij het maken van invalsneden
De geleiderails vergrendeling zorgt voor stabiliteit bij het maken van versteksneden
De zaagdiepte kan nauwkeurig tot op 54 mm verstelt worden
De zaagsnede breedte indicators geven de exacte positie van het zaagblad op het werkstuk weer
De snelle zaagbladverwisseling wordt uitgevoerd door de zaagbladbeschermkap heen
Een efficiënte stofontginning wordt bereikt met de universele adapter en 360° uitlaat
De zaagblad-verwisselstand en uit-stand vergrendeling zorgen voor een gemakkelijk zaagblad verwisseling
De invalvergrendeling houdt het zaagblad in de beschermkap wanneer de machine niet in gebruik is
De rubberen antislip over-grip zorgt voor een uitstekende grip, voor een veilig en gecontroleerd gebruik van de machine

Product specificaties

Afschuiningsbereik 0 - 48°
Blad diameter 165 mm
Zaagblad type 60 TCT
Asgat diameter 20 mm
Elektronische snelheidsbehoud Ja
Materiaal - primaire constructie Aluminium
Onbelaste snelheid 2000 - 5000 min-1
Vermogen 1400 W
Hoogte 250 mm
Lengte 340 mm
Gewicht 5,4 kg
Breedte 230 mm
Geluidsniveau LW 104,87 dB(A), KWA=3 dB(A)
Geluidsdruk LP 93,87dB(A), KpA=3 dB(A)
Doos inhoud - 01 1 x 1400 W invalcirkelzaag
Doos inhoud - 02 1 x Cirkelzaagblad (gemonteerd): 165 x 20 x 60 tanden
Doos inhoud - 03 1 x Moersleutel
Doos inhoud - 04 1 x Stofafvoeradapter
Doos inhoud - 05 1 x Stofafvoeradapter
Doos inhoud - 06 1 x Handleiding

Handleidingen

TTS 1400


Compatibel met

TTS TP

Rails set en verbindingsstukken

Twee 700 mm lange geleiderails met een paar koppelstukken. Te gebruiken met de invalcirkelzaag TTS1400.

Meer informatie
TTS T1500

Geleiderails

1500 mm lange geleiderails. Te gebruiken met de Triton invalcirkelzaag TTS1400. Kan ook gebruikt worden met Festool & Makita invalcirkelzagen.

Meer informatie
TTS TC

Geleiderails verbinders

De geleiderails verbinders zijn geschikt voor het verlengen van de geleiderails lengte. Te gebruiken met de Triton invalcirkelzaag TTS1400.

Meer informatie
TTS 60T

Invalcirkelzaagblad, 60T

TCT zaagblad, compatibel met de Triton invalcirkelzaag TTS1400.

Meer informatie
TTS TS

T-winkelhaak

Vaste 90° geleider voor perfecte rechte zaagsneden. Te gebruiken met de Triton invalcirkelzaag TTS1400. De T-haak kan gebruikt worden met DeWalt, Festool en Makita geleiderails. Let op: voor het maken van een hoekzaagsnede heeft u een minimale geleiderails lengte van 140 mm nodig, met of zonder werkklem.

Meer informatie
TTS AG

Hoekgeleider

De geleider stelt de zaag tot op +/- 55°. Te gebruiken met de Triton invalcirkelzaag TTS1400. Let op: voor het maken van een hoekzaagsnede heeft u een minimale geleiderails lengte van 140 mm nodig, met of zonder werkklem.

Meer informatie
TTS WC

Werkklemmen

De twee werkklemmen zetten de geleiderails op het werkstuk vast. Te gebruiken met de Triton TTS1400 invalcirkelzaag. Elke klem vereist 25 mm geleiderails.

Meer informatie
TTS DES

Stof ontginningssysteem

Stof ontginningssysteem met half stugge, 1000 ml capaciteit. Te gebruiken met de invalcirkelzaag TTS1400. Hoge filtercapaciteit, niet geweven materiaal. Heldere filterindicator.

Meer informatie
TTS SB

Invalcirkelzaag draagtas

Invalcirkelzaag draagtas, te gebruiken met de invalcirkelzaag TTS1400.

Meer informatie
TTS PG

Parallelgeleider

Parallelgeleider voor het parallel zagen van werkstukken. Voor het behouden van een soepele en constante positionering tijdens het zagen. Te gebruiken met de Triton invalcirkelzaag TTS1400. Lengte 315 mm.

Meer informatie
TTS CB700

Draagtas voor de 700 mm geleiderails

Draagtas voor de 700 mm geleiderails.

Meer informatie
TTS CB1500

Draagtas voor de 1500 mm geleiderails

Draagtas voor de 1500 mm geleiderails

Meer informatie

{0} reviews

{{resourceStrings.Page_Support_ProductRegistration_Successful}}
33 Review(s)
I have been using it to cut moulding from full sheets. works like a charm. The only con is the anti kick back, I removed it and now it is perfect. I am going to buy another track so I can purchase 12 foot sheets and make 12 foot mouldings

paid for itself on the first job michael low - 11-2-2019

I have seen and used the 1400 W Plunge Track Saw. I am so excited to add this instrument to my small work shop. Accuracy is spot on and versatility is exactly what I was looking for. I like my small shop with its manual and machined instruments and this 1400 W Plunge Track Saw finishes my shop instrumentation.

Review 1400W Plunge Track Saw William Payne - 8-1-2019

This tool is just perfect! Nice cuts and easy to handle.

Perfect tool Leblanc - 16-12-2018

Does what ir says on the box, a vast improvement on my old circular saw and home made ply track. Plunge is very useful when cut needed part way across aboard without cutting edge.

TTS1400 Graham Frankland - 14-12-2018

Habituer au scie circulaire traditionnel, une plongeante change vraiment la façon de travaillé avec les rails . Facile et efficaces cet scie est vraiment très bien.

Super produit Pierrick - 23-10-2018

Ho acquistato questa circolare perché avevo bisogno di qualcosa di pratico e funzionale, a causa del poco spazio nel mio laboratorio, in cui non uso attrezzi stazionari. Molto pratica e funzionale perché utilizzando le piste e altri accessori riesco ad avere tutte le lavorazioni che avrei con una troncatrice o banco sega. Sono molto soddisfatto del mio acquisto.

Triton tts1400 Federico - 10-7-2018

Works well for the price but I do not like the plastic depth guage design. I would like to see the depth guage function a little better. If you want plan on using a track saw as a professional, you might look at other options.

Great value Chris - 8-5-2018

I cannot say enough good things about the service I received from Debbie Long with Toolstream USA out of Charlotte, NC. I had a motor go out on a 1400 Plunge saw just weeks before the warranty deadline. They took my saw and communicated all their efforts to repair the motor. Within a couple of days they concluded the motor was not going to be repaired and replaced the entire saw. Andy Venable Knoxville, TN

returned my 3 year old saw Andrew Venable - 21-2-2018

I've used the saw for approx 2 months now and I have to say the results are really good. Firstly the build quality is excellent, the plunge action is very smooth. I've used the FT saw and this is an excellent saw to compare, especially considering the cost. Negatives, saw blade quality could be a little better, dust extraction at the front end could be better, and the kick back function can be frustrating. All in all this is a great bit of kit and couldn't recommend it highly enough.

Awesome piece of kit Nick O'Donoghue - 20-2-2018

Nachdem meine alte Säge nicht mehr funktionierte, habe ich eine Triton TTS1400 mit einigem Zubehör als Ersatz angeschafft. Der erste Eindruck ist sehr positiv, der Winkel-Anschlag hilft beim raschen ablängen, die Schiene bietet einen Rückschlagschutz und die Zwingen sichern die Schiene gut gegen verrutschen. Ich bin zufrieden :-).

Neue Handkreissäge Andreas - 7-1-2018

All the features of more expensive saws, easy to adjust for different stock. No more moving sheet stock, no second cuts through the table saw. Laser accurate cuts, easy set up clamping system. Love it.

owner David Smith - 14-12-2017

Excellent tool

Plunge Saw Norman Scott - 5-12-2017

I am a professional wood worker and used the TTS 1400 to cut various thickness sheet stock. It took a little getting used to, but once I was familiar with set up I found it saved me a lot of time and effort. No more over cutting then running through the table saw for finish cut. Laser accurate cuts, every time. A great quality tool with all the features of other more expensive models.

TTS 1400 David Smith - 29-11-2017

Only used a few times so far, but I don't think I made a mistake in buying it.

Track saw Jeff Patro - 11-11-2017

I am pleased with the performance of the 1400W Plunge Track Saw. It has done a good job on plywood and hardboard. My complaint is the poor instructions. The manual does not describe the proper sequence to start the motor and does not describe the depth adjustment for with and without the track. I would give it 5 stars if the manual was better.

Track Saw does the job Walter Ballard - 30-10-2017

The saw leaves a nice finish to the cut. I find the depth stop scale to be off a bit and I wish it got more of the sawdust when connected to a dust collection system, perhaps it needs the large window for changing the blade sealed. I really dislike having to press the anti-kickback lever when engaging the saw onto the track and this also is a problem if you have to back the saw up in a cut because of binding or some other reason. A riving knife would be safer and easier to use.

Nice finish Jay - 24-10-2017

Well made, easy to use.

Track saw Irene - 23-9-2017

Excellent matériel ! Que dire de plus sinon PARFAIT !!!

SUPER ! Lequesne Jean-Claude - 17-9-2017

Super! En rapport qualité/prix, que dire d'autre que SUPER ! Je recommande !!!!

Super Lequesne Jean-Claude - 2-9-2017

It is not very accurate when you connect two short track together.

The problem of track Yi Zhang - 26-8-2017

Ich habe gestern die Maschine zum erstenmal benutzt und bin sehr zufrieden.

Hobby-Handwerker Karl-Heinz Gottwald - 5-7-2017

Purchased this track saw as a kit including clamps and bag and two 29" tracks etc, first impressions were pleasing cutting cleanly, it took a little time getting used to the slow soft start (compared to my other saws) but it got the job done well and accurately, I find the clamps very handy when doing long cuts, to this end I purchased the 1500mm track and extra rail joints. Very good value and will no doubt work as well as my other triton tools for many years.

Great track saw at sensible money.. Graham Alexander - 20-5-2017

Je suis très content de mon achat outils très qualitatifs très bonne finition très grand precision je recommande vivement

État : Nouveau produit Scie circulaire plongeante D. 165 mm 230 V 1400W Come - 17-5-2017

As with many home woodworking shops, space is a real issue - probably the biggest issue! My little 12'x 16' shop had no room to break down 4'x8' plywood and my saw only has a 25" rip capacity. Consequently, I was forced to rely on the cutting station at the local "big box store" with their out of square fences and dull blades that make a cut that looks like it was done with a meat axe. I bought the Triton 1400 track saw and two lengths of track a couple of months ago and I'm in heaven - Beautiful straight, clean cuts with no "chatter" or tear out. The set up time and learning curve was minimal. I have now built a pull down vertical panel cutting rack that hangs from the ceiling when not in use. Though you need to purchase the track clamps, the TTS1400 works perfectly in the vertical orientation as well. Great Addition To My Shop!!

TTS1400 - An Awesome Addition To a Small Workshop Michael Thompson - 1-5-2017

This saw works as expected. Clean easy cuts. Just the thing for small shops blanking sheet goods.

Track saw smiles Allen Culuris - 27-2-2017

The Triton track saw I definitely worth it if your on a budget. It has a lot of good features. And great track. The only con I've found is that the anti kickback knob is a bit annoying to deal with when making a shallow kerf cut. But I can live with it.

Best track saw for my budget Ozzy Deschapell - 22-2-2017

Have used my new track saw for a couple small projects. I am very impressed with the quality of cuts this saw makes. I fell it makes better cuts than my expensive table saw. I plan on using my Trit on track saw for many projects.

Tra k saw Andre Faucher - 27-1-2017

I had been looking for good track saw within my budget for some time. Having looked at the other brands they all seem to have sinilar features with significantly differing price tags. I was impressed with the super-jaws i bought some time ago so gave a look at the Triton track saw. Very impressed. Smooth in operation solidly built and quieter than expected. After a few minutes getting used to its operation and features was ready to cut that first cut. Since perfect accurate cuts to my lines every time. Finish left is good too. Definately reccomend.

Track saw Kevin James - 14-11-2016

A track saw has always been on my list of tools to buy, as I work with sheets of ply often and they are hard to drop over a table saw even with a sliding table attachment. The cuts are crisp and its so easy to get perfectly parallel cuts. This works large blanks and sheet good so easily that a new world of wood working possibilities is opening up to me . I don't know how I managed without this saw. A definite must for every workshop, shed or garage.

a cut above caleb - 13-10-2016

Very good saw. Does everything I need , everything I expected and does it as well as my neighbors Festool track saw. At less than half the price! Very happy with this purchase. Chuck

Track Saw Charles Keefer - 26-9-2016

Purchased 1400W track saw, the saw worked to my satisfaction and has some nice features. I did have a problem with the 27" tracks, the ends were not square. Contacted cust. serv. and they were understanding and sent me a replacement set. As of now I have not had a chance to use the new set, hopefully they are OK.

Jerry Gerald Blevens - 3-9-2016

I reviewed several track saws on line and got them down to two. A visit to my local Rockler store helped me decide. Price and options won out with my Triton TTS1400. It's closest competition was Dewalt. Having short tracks I can do smaller pieces or connect for longer boards was a main advantage. Locking on track to prevent kickback and angles is great also. The only thing missing would be a riving knife.

After careful review, Triton won out Mark Barber - 1-8-2016

I am honestly at a loss as to how I managed before purchasing this saw. Perfectly straight and parallel cuts used to be difficult to achieve, but are now a snap. This product has now replaced my table saw for the vast majority of tasks. Great stuff, Triton!

A Revelation Marc Jennings - 1-8-2016