ETA 300

Maxi posuvný podpěrný stůl

Velká kapacita a snadno čitelné kalibrované stupnice dovolují řezat velké desky včetně desky velikosti 2400 x 1200 mm. Stůl může být uzamčen v libovolné pozici při řezání širokých materiálů. Posuvný stůl umožňuje řezání pomocí panelové pily. Patentovaný podélný doraz dovoluje nastavení dorazu ve všech úhlech. Obsahuje také svěrky pro zajištění materiálu.

Vlastnosti produktu

Zamykání a odemykání posuvného stolu pro běžné řezání nebo pro použití jako posuvný panel
Více poziční vodítko pro výbornou kontrolu řezaného kusu

Technické informace

Materiál - základní složení Hliník
Výška 1000 mm
Délka 2016 mm
Hmotnost 21 kg
Šířka 960 mm
Co je součástí balení - 01: 1 x Maxi sliding extension table
Co je součástí balení - 02: 1 x Instruction manual

Návody

ETA 300


Recenze

{{resourceStrings.Page_Support_ProductRegistration_Successful}}
3 Review(s)
First saw is a triton compact to which I adapted the eta300 table on the right hand side good kit and accurate once the home made brackets were set in position. I have joined a second compact saw in line using brackets made to go through the leg storage holes to keep it all tied together. Drop in beds fill the gaps. Just recently I have added a second eta300 to the left hand side as a lot of my hobby consists of dealing with 1200x2400 sheats of ply also 3 to 6 meter timber as it allows me to work alone. The eta 300 are good kit once the time is taken to set up to index with blade to fence markings very accurate. All is easy to dismantle for storage max

maxi extension table ETA300 max campbell - 10.01.2019

Had the extension table now for a few years, use it most weeks and it continues to work great exactly as described. Build quality as always with Triton is top notch.

Great product Paul - 23.10.2018

The ETA300 is a sturdy bit of kit. However, the packaging is not good. The heavy steel rails managed to scratch the aluminium extrusions and scales of the sliding table. I had to send the 1st one back. The 2nd was a bit better but it seems that the brackets on the inner track can scratch the aluminium components. Once I'd set it up I found that it was impossible to get the 500mm setting right at step 15. Effectively I couldn't move the inner track close enough to the table. This is a manufacturing tolerance issue. There may be a work-around but I shall be attempting to contact Triton for help. Unfortunately the support arrangements are currently not consistent with the type of 'enthusiast' product this is. Try finding a UK contact telephone number. You won't!

Packing and manufacturing tolerance issues Jeremy Klein - 29.06.2017