TTS 1400

1400W Plunge Track Saw

Easily accessible shaftlock aids fast, convenient blade-change. Plunge lock for safety enhancement. Soft-grip handles. Fits to guide track system for smooth, precise straight and bevel cutting. On-board tool storage. Variable speed with soft start and constant speed. Includes 165mm / 6-1/2" 48TCT blade. Bevel range of 0-48°.

Product Features

Mode selector for quick change between free plunge, scribe, and blade change modes
Scribe mode eliminates splintering and tear-out
Easy change carbon brushes to further extend the product life-span
Precision bevel cut adjustment of bevel angle from 0 – 48º
Dual bevel quadrants provide stability for precision cutting
Variable speed, soft start and constant speed electronics optimised for required cutting conditions for every material
Dual alignment cams fine tune the fit between the saw and track for exact cuts
Anti-kickback safety feature prevents the saw from jolting when performing plunge cuts
Guide rail track lock adds stability when performing bevel cuts
Precise cutting depth adjustment can be set to a maximum of 2-1/8"
Width of cut indicators for exact positioning of blade on the work piece
Fast blade replacement easily accessed through the blade guard
Highly efficient dust extraction with universal vacuum system adaptor and 360° outlet
Blade-change mode and power switch lock-out for easy blade changes
Plunge lock secures the blade inside the guard when not in use
Non-slip rubber over-moulded grip offers increased support, safety and control

Technical Specification

Bevel Range 0 - 48°
Blade Diameter 6-1/2"
Blade Type 48TCT x 0.063" x 0.086"
Bore Diameter 20mm
Electronic Speed Maintenance Yes
Material - Primary Construction Aluminium
No Load Speed 2000 - 5000rpm
Power 12A
Product Height 11-1/2"
Product Length 13-3/4"
Product Weight 14lb
Product Width 10-1/4"
Sound Power LW 104.87 dB(A), KWA=3 dB(A)
Sound Pressure LP 93.87dB(A), KpA=3 dB(A)
What's in the box - 01 1 x 6-1/2" 48TCT saw blade
What's in the box - 02 1 x Carbon brush (pair)
What's in the box - 03 1 x Dust outlet adaptor


TTS 1400

Compatible With


Track Pack & Connectors

Pair of 700mm / 27-9/16" track lengths with a pair of track connectors. For use with the Triton Track Saw TTS1400.

Find out more
TTS T1500


Length of 1500mm / 59" track. For use with the Triton Track Saw TTS1400.

Find out more

Track Connectors

Pair of Track Connectors to extend overall track length. For use with the Triton Track Saw TTS1400.

Find out more

Plunge Track Saw Blade 60T

Tungsten carbide blade for Triton Plunge Track Saw TTS1400.

Find out more

T Square

Fixed 90° for perfectly square cuts. For use with the Triton Track Saw TTS1400. Can be used with DeWalt, Festool and Makita tracks. Mitre needs 140mm (5 1/2") of track length with or without work clamp.

Find out more

Angle Guide

Set angles up to +/- 55° for precision cutting. For use with the Triton Track Saw TTS1400. Please note mitre needs more than 140mm (5-1/2”) of track length with or without work clamp.

Find out more

Work Clamps

Pair of Work Clamps to secure the track on the workpiece. For use with the Triton Track Saw TTS1400. Each clamp needs 25mm / 1" of track length.

Find out more

Dust Extraction System

Dust management system with semi-rigid 1000ml / 33fl oz capacity. For use with the Triton Track Saw TTS1400. High filtering capacity non-woven material. Clear fill indication.

Find out more

Plunge Track Saw Bag

Plunge Track Saw Bag for use with the Plunge Track Saw TTS1400.

Find out more

Parallel Guide

Parallel side fence for guiding on workpiece. Maintains smooth, constant positioning during cutting. For use with the Triton Track Saw TTS1400. Length 315mm / 12-1/2”.

Find out more


38 Review(s)
Excellent machine

Tools Julio Cesar Bassetto - 2020-04-05

Really pleased with my new purchase I used it with a makita guide rail and was happy with how the saw performed, would have given 5 stars but the blade could be better

Triton plunge saw Kevin - 2020-04-04

...but unfortunately I've got a Problem since first use. Sent a question to Triton Support and got an answer in less than 1 working day. they told me to contact the reseller for an exchange. And if this is not possible I can contact them again, so in my point of view they do a great job. But Quality and possibilities are great, handling is also very good. Anti-kickback safety feature is great and I think it's the only saw I know that has this feature. Guide rail track lock as well is very good and easy to use and very helpful when cutting bevel cuts. Dust extraction worked fine, even while having a problem with the saw. One of the great things is the blade lock for scribe mode and also the quick lock to exchange the blade. All together I've to say it's a great saw and I'm very happy I bought it. And if my problem is fixed I surely will use it more than my (cheap) tablesaw (until I'll buy a better one) because there are more possibilities and precision and quality! Thanks for another great product ("another" because I've got the MOF 001 Plunge Router as well).

I think it's a great Saw... Marcel Zerbini - 2020-03-27

After reading good reviews of this track saw, I decided to purchase one, and I wasn’t disappointed. The saw gives a nice cut on veneer plywood, especially when using the scoring cut feature before making the through cut. The saw comes with a nice carbide blade installed which performs well. The fence has a grippy rubber backing, so it stays put without the need for clamps. I just lay the plywood onto sheets of rigid foam insulation on the shop floor, line up the zero clearance edge guide with my cut line, and go. The dust port connects to my shop vac and does a good job of eliminating most of the dust. I was also impressed with the anti-kick back feature. Once connected to the fence, the saw cannot move backward in the cut, so it’s very safe to use. For the money, this saw is an excellent value. The fence is available in either a single piece or two piece design.

Very nice saw Jim Gott - 2020-02-06

Great bit of kit for a reasonable price. Accurate cuts and solid build quality. Well done Triton.

Plunge saw David Beswick - 2020-02-05

I have been using it to cut moulding from full sheets. works like a charm. The only con is the anti kick back, I removed it and now it is perfect. I am going to buy another track so I can purchase 12 foot sheets and make 12 foot mouldings

paid for itself on the first job michael low - 2019-02-11

I have seen and used the 1400 W Plunge Track Saw. I am so excited to add this instrument to my small work shop. Accuracy is spot on and versatility is exactly what I was looking for. I like my small shop with its manual and machined instruments and this 1400 W Plunge Track Saw finishes my shop instrumentation.

Review 1400W Plunge Track Saw William Payne - 2019-01-08

This tool is just perfect! Nice cuts and easy to handle.

Perfect tool Leblanc - 2018-12-16

Does what ir says on the box, a vast improvement on my old circular saw and home made ply track. Plunge is very useful when cut needed part way across aboard without cutting edge.

TTS1400 Graham Frankland - 2018-12-14

Habituer au scie circulaire traditionnel, une plongeante change vraiment la façon de travaillé avec les rails . Facile et efficaces cet scie est vraiment très bien.

Super produit Pierrick - 2018-10-23

Ho acquistato questa circolare perché avevo bisogno di qualcosa di pratico e funzionale, a causa del poco spazio nel mio laboratorio, in cui non uso attrezzi stazionari. Molto pratica e funzionale perché utilizzando le piste e altri accessori riesco ad avere tutte le lavorazioni che avrei con una troncatrice o banco sega. Sono molto soddisfatto del mio acquisto.

Triton tts1400 Federico - 2018-07-10

Works well for the price but I do not like the plastic depth guage design. I would like to see the depth guage function a little better. If you want plan on using a track saw as a professional, you might look at other options.

Great value Chris - 2018-05-08

I cannot say enough good things about the service I received from Debbie Long with Toolstream USA out of Charlotte, NC. I had a motor go out on a 1400 Plunge saw just weeks before the warranty deadline. They took my saw and communicated all their efforts to repair the motor. Within a couple of days they concluded the motor was not going to be repaired and replaced the entire saw. Andy Venable Knoxville, TN

returned my 3 year old saw Andrew Venable - 2018-02-21

I've used the saw for approx 2 months now and I have to say the results are really good. Firstly the build quality is excellent, the plunge action is very smooth. I've used the FT saw and this is an excellent saw to compare, especially considering the cost. Negatives, saw blade quality could be a little better, dust extraction at the front end could be better, and the kick back function can be frustrating. All in all this is a great bit of kit and couldn't recommend it highly enough.

Awesome piece of kit Nick O'Donoghue - 2018-02-20

Nachdem meine alte Säge nicht mehr funktionierte, habe ich eine Triton TTS1400 mit einigem Zubehör als Ersatz angeschafft. Der erste Eindruck ist sehr positiv, der Winkel-Anschlag hilft beim raschen ablängen, die Schiene bietet einen Rückschlagschutz und die Zwingen sichern die Schiene gut gegen verrutschen. Ich bin zufrieden :-).

Neue Handkreissäge Andreas - 2018-01-07

All the features of more expensive saws, easy to adjust for different stock. No more moving sheet stock, no second cuts through the table saw. Laser accurate cuts, easy set up clamping system. Love it.

owner David Smith - 2017-12-14

Excellent tool

Plunge Saw Norman Scott - 2017-12-05

I am a professional wood worker and used the TTS 1400 to cut various thickness sheet stock. It took a little getting used to, but once I was familiar with set up I found it saved me a lot of time and effort. No more over cutting then running through the table saw for finish cut. Laser accurate cuts, every time. A great quality tool with all the features of other more expensive models.

TTS 1400 David Smith - 2017-11-29

Only used a few times so far, but I don't think I made a mistake in buying it.

Track saw Jeff Patro - 2017-11-11

I am pleased with the performance of the 1400W Plunge Track Saw. It has done a good job on plywood and hardboard. My complaint is the poor instructions. The manual does not describe the proper sequence to start the motor and does not describe the depth adjustment for with and without the track. I would give it 5 stars if the manual was better.

Track Saw does the job Walter Ballard - 2017-10-30

The saw leaves a nice finish to the cut. I find the depth stop scale to be off a bit and I wish it got more of the sawdust when connected to a dust collection system, perhaps it needs the large window for changing the blade sealed. I really dislike having to press the anti-kickback lever when engaging the saw onto the track and this also is a problem if you have to back the saw up in a cut because of binding or some other reason. A riving knife would be safer and easier to use.

Nice finish Jay - 2017-10-24

Well made, easy to use.

Track saw Irene - 2017-09-23

Excellent matériel ! Que dire de plus sinon PARFAIT !!!

SUPER ! Lequesne Jean-Claude - 2017-09-17

Super! En rapport qualité/prix, que dire d'autre que SUPER ! Je recommande !!!!

Super Lequesne Jean-Claude - 2017-09-02

It is not very accurate when you connect two short track together.

The problem of track Yi Zhang - 2017-08-26

Ich habe gestern die Maschine zum erstenmal benutzt und bin sehr zufrieden.

Hobby-Handwerker Karl-Heinz Gottwald - 2017-07-05

Purchased this track saw as a kit including clamps and bag and two 29" tracks etc, first impressions were pleasing cutting cleanly, it took a little time getting used to the slow soft start (compared to my other saws) but it got the job done well and accurately, I find the clamps very handy when doing long cuts, to this end I purchased the 1500mm track and extra rail joints. Very good value and will no doubt work as well as my other triton tools for many years.

Great track saw at sensible money.. Graham Alexander - 2017-05-20

Je suis très content de mon achat outils très qualitatifs très bonne finition très grand precision je recommande vivement

État : Nouveau produit Scie circulaire plongeante D. 165 mm 230 V 1400W Come - 2017-05-17

As with many home woodworking shops, space is a real issue - probably the biggest issue! My little 12'x 16' shop had no room to break down 4'x8' plywood and my saw only has a 25" rip capacity. Consequently, I was forced to rely on the cutting station at the local "big box store" with their out of square fences and dull blades that make a cut that looks like it was done with a meat axe. I bought the Triton 1400 track saw and two lengths of track a couple of months ago and I'm in heaven - Beautiful straight, clean cuts with no "chatter" or tear out. The set up time and learning curve was minimal. I have now built a pull down vertical panel cutting rack that hangs from the ceiling when not in use. Though you need to purchase the track clamps, the TTS1400 works perfectly in the vertical orientation as well. Great Addition To My Shop!!

TTS1400 - An Awesome Addition To a Small Workshop Michael Thompson - 2017-05-01

This saw works as expected. Clean easy cuts. Just the thing for small shops blanking sheet goods.

Track saw smiles Allen Culuris - 2017-02-27

The Triton track saw I definitely worth it if your on a budget. It has a lot of good features. And great track. The only con I've found is that the anti kickback knob is a bit annoying to deal with when making a shallow kerf cut. But I can live with it.

Best track saw for my budget Ozzy Deschapell - 2017-02-22

Have used my new track saw for a couple small projects. I am very impressed with the quality of cuts this saw makes. I fell it makes better cuts than my expensive table saw. I plan on using my Trit on track saw for many projects.

Tra k saw Andre Faucher - 2017-01-27

I had been looking for good track saw within my budget for some time. Having looked at the other brands they all seem to have sinilar features with significantly differing price tags. I was impressed with the super-jaws i bought some time ago so gave a look at the Triton track saw. Very impressed. Smooth in operation solidly built and quieter than expected. After a few minutes getting used to its operation and features was ready to cut that first cut. Since perfect accurate cuts to my lines every time. Finish left is good too. Definately reccomend.

Track saw Kevin James - 2016-11-14

A track saw has always been on my list of tools to buy, as I work with sheets of ply often and they are hard to drop over a table saw even with a sliding table attachment. The cuts are crisp and its so easy to get perfectly parallel cuts. This works large blanks and sheet good so easily that a new world of wood working possibilities is opening up to me . I don't know how I managed without this saw. A definite must for every workshop, shed or garage.

a cut above caleb - 2016-10-13

Very good saw. Does everything I need , everything I expected and does it as well as my neighbors Festool track saw. At less than half the price! Very happy with this purchase. Chuck

Track Saw Charles Keefer - 2016-09-26

Purchased 1400W track saw, the saw worked to my satisfaction and has some nice features. I did have a problem with the 27" tracks, the ends were not square. Contacted cust. serv. and they were understanding and sent me a replacement set. As of now I have not had a chance to use the new set, hopefully they are OK.

Jerry Gerald Blevens - 2016-09-03

I reviewed several track saws on line and got them down to two. A visit to my local Rockler store helped me decide. Price and options won out with my Triton TTS1400. It's closest competition was Dewalt. Having short tracks I can do smaller pieces or connect for longer boards was a main advantage. Locking on track to prevent kickback and angles is great also. The only thing missing would be a riving knife.

After careful review, Triton won out Mark Barber - 2016-08-01

I am honestly at a loss as to how I managed before purchasing this saw. Perfectly straight and parallel cuts used to be difficult to achieve, but are now a snap. This product has now replaced my table saw for the vast majority of tasks. Great stuff, Triton!

A Revelation Marc Jennings - 2016-08-01