20V Li-Ion Battery 4.0Ah
High capacity battery with no memory effect and very low self-discharge when stored. High performance Lithium-ion cells are capable of 500-1500 charge cycles. Long life blade contacts. Charge times with T20BC charger: 80%: 60min, 100%: 80min. Compatible with Triton T20 range of power tools. Weight 0.38kg.
20V Li-Ion Battery 2.0Ah
Fast-charging battery with no memory effect and very low self-discharge when stored. High performance Lithium-ion cells are capable of 500-1500 charge cycles. Long life blade contacts. Charge times with T20BC charger: 80%: 30min, 100%: 40min. Compatible with the Triton T20 range of power tools. Weight 0.4kg.
Workcentre Dust Bag
Easy-fit dust bag with detachable pouch. Combined with a vacuum connection to the overhead guard, this dust bag collects almost 100% of the dust created in tablesaw mode. Compatible with MK3 and Series 2000 Workcentres. Dust Bag model DCA100 required for Triton Saw Table. Includes vacuum hose and bayonet and tapered hose connectors.
Maxi Sliding Extension Table
Huge capacity and easy-to-read calibration scales allow operator to cut large sheets, including full size 2400 x 1200mm. Table can be locked in position for conventional ripping of wide workpieces. Sliding table for panel saw use. The patented rip fence design allows fence settings at all angles. Incorporates work hold-down clamps.
Blade Height Winder Kit
Provides quick and precise blade height adjustment. Control blade height by a winder through the table slot or by thumb wheel in crosscut mode. Allows your saw to remain at its full depth, in its most stable position. Suits Workcentre System Series 2000, including WCA201, WCA200, WCA001.
Saw Stabilising Bracket
Triton Stabilising Bracket facilitates accuracy when using the Triton Workcentre. It minimises saw deflection when cutting under load, and saw slump when the saw is changed from the table saw to the crosscut mode or vice-versa. The bracket is fully adjustable for various cutting depths and angles.
Bevel Ripping Guide
Enables accurate bevels and chamfers from 15° through to 90°. Compatible with Triton Saw Table TCB100. Fully adjustable to handle long and wide workpieces. Accurate control for short bevels and perfect compound mitres. Integral calibration scales for easy alignment. Full instructions including guide to bevel angle settings required for the most common shapes.
Bevel Ripping Guide
Enables accurate bevels and chamfers from 15° through 90°. Makes use of the Workcentre protractor for control of short bevels and perfect compound mitres. Fully adjustable, for bevelling or chamfering of long and wide pieces. Fits Triton Workcentre System 2000 directly; adaptor kit available for earlier models.
Biscuit Joiner
Triton’s unique Biscuit Joiner quickly fits to the Triton Router Table for fast, strong and invisible joints. Ideal for bevel, mitre, rail-to-stile, edge-to-edge, end-to-end, rail-to-post, edge-to-face, right angle joints and other forms of edge joinery. Includes TCT cutter and pack of biscuits. Additional biscuits available in packs of 50 (BJA050) and 500 (BJA056).
Dowel Jointer Bits 8mm 2pk
Tungsten carbide cutting head with tip and spurs. Twin-fluted hardened steel shank and twin-fluted body for a smooth finish. Compatible with Triton Duo Dowel Jointer TDJ600. 10mm shank.
Dowel Jointer Bits 10mm 2pk
Tungsten carbide cutting head with tip and spurs. Twin-fluted hardened steel shank and twin-fluted body for a smooth finish. Compatible with Triton Duo Dowel Jointer TDJ600. 10mm shank.
Dowel Jointer Bits 12mm 2pk
Tungsten carbide cutting head with tip and spurs. Twin-fluted hardened steel shank and twin-fluted body for a smooth finish. Compatible with Triton Duo Dowel Jointer TDJ600. 10mm shank.
T20 Fast Charger
Intelligent charger with multiple safety features which protect the battery, tool and charger. Compatible with T20 batteries. 100% charge level 40min (2Ah), 80min (4Ah). 80% charge level 30 min (2Ah), 60min (4Ah). LED charging status indication and long-life blade contacts.
20V Li-Ion Battery 4.0Ah
High capacity battery with no memory effect and very low self-discharge when stored. High performance Lithium-ion cells are capable of 500-1500 charge cycles. Long life blade contacts. Charge times with T20BC charger: 80%: 60min, 100%: 80min. Compatible with Triton T20 range of power tools. Weight 0.38kg.
20V Li-Ion Battery 2.0Ah
Fast-charging battery with no memory effect and very low self-discharge when stored. High performance Lithium-ion cells are capable of 500-1500 charge cycles. Long life blade contacts. Charge times with T20BC charger: 80%: 30min, 100%: 40min. Compatible with the Triton T20 range of power tools. Weight 0.4kg.
Aluminium Oxide Sanding Sleeves 6pce
Set of 6 sanding sleeves with cloth backing for use with the Triton Oscillating Spindle Sander TSPS450. Includes sizes 13, 19, 26, 38, 51 and 76mm (1/2", 3/4", 1", 1 1/2", 2" and 3". Length 115mm (4 1/2").
Aluminium Oxide Sanding Sleeves 6pce
Set of 6 sanding sleeves with cloth backing for use with the Triton Oscillating Spindle Sander TSPS450. Includes sizes 13, 19, 26, 38, 51 and 76mm (1/2", 3/4", 1", 1 1/2", 2" and 3"). Length 115mm (4 1/2").
Aluminium Oxide Sanding Sleeves 6pce
Set of 6 sanding sleeves with cloth backing for use with the Triton Oscillating Spindle Sander TSPS450. Includes sizes 13, 19, 26, 38, 51 and 76mm (1/2", 3/4", 1", 1 1/2", 2" and 3"). Length 115mm (4 1/2").
Hook & Loop Backing Pad
Firm backing pad with profiled, soft edge and 16 holes for enhanced dust extraction. For use with hook and loop polishing sponges, bonnets and sanding discs. Compatible with TGEOS sander polisher. M8 x 15mm bolt connection. Max 8,500rpm.
Aluminium Oxide Sanding Belts 3pk
High quality sanding belt provides outstanding life and durability. Made with aluminium oxide grain with epoxy resin for load resistance. Strong polyester X-weight backing. Compatible with Triton Palm Belt Sander TCMBS for rapid stock removal.
Aluminium Oxide Sanding Belts 3pk
High quality sanding belt provides outstanding life and durability. Made with aluminium oxide grain with epoxy resin for load resistance. Strong polyester X-weight backing. Compatible with Triton Palm Belt Sander TCMBS for rapid stock removal.
Aluminium Oxide Sanding Belts 3pk
High quality sanding belt provides outstanding life and durability. Made with aluminium oxide grain with epoxy resin for load resistance. Strong polyester X-weight backing. Compatible with Triton Palm Belt Sander TCMBS for rapid stock removal.
Aluminium Oxide Sanding Belts 3pk
High quality sanding belt provides outstanding life and durability. Made with aluminium oxide grain with epoxy resin for load resistance. Strong polyester X-weight backing. Compatible with Triton Palm Belt Sander TCMBS for rapid stock removal.
Aluminium Oxide Sanding Belts 3pk
High quality sanding belt provides outstanding life and durability. Made with aluminium oxide grain with epoxy resin for load resistance. Strong polyester X-weight backing. Compatible with Triton Palm Belt Sander TCMBS for rapid stock removal.
Aluminium Oxide Sanding Belts 3pk
High quality sanding belt provides outstanding life and durability. Made with aluminium oxide grain with epoxy resin for load resistance. Strong polyester X-weight backing. Compatible with Triton Palm Belt Sander TCMBS for rapid stock removal.
Sanding Sleeve for TRPUL Sanding Drum
Sanding sleeve for Triton Unlimited Rebate Planer 750W (TRPUL) Sanding Drum.
Aluminium Oxide Sanding Belt 5pk
High quality sanding belt provides outstanding life and durability. Made with aluminium oxide grain with epoxy resin for load resistance. Strong polyester X-weight backing. Fits all 76 x 533mm (3 x 21") sanders for rapid stock removal.
Aluminium Oxide Sanding Belts 3pk
High quality sanding belt provides outstanding life and durability. Made with aluminium oxide grain with epoxy resin for load resistance. Strong polyester X-weight backing. Compatible with Triton Palm Belt Sander TCMBS for rapid stock removal.
Aluminium Oxide Sanding Belt 5pk
High quality sanding belt provides outstanding life and durability. Made with aluminium oxide grain with epoxy resin for load resistance. Strong polyester X-weight backing. Fits all 75 x 533mm (3 x 21") sanders for rapid stock removal.
Aluminium Oxide Sanding Belt 5pk
High quality sanding belt provides outstanding life and durability. Made with aluminium oxide grain with epoxy resin for load resistance. Strong polyester X-weight backing. Fits all 76 x 533mm (3 x 21") sanders for rapid stock removal.
Aluminium Oxide Sanding Belt 5pk
High quality sanding belt provides outstanding life and durability. Made with aluminium oxide grain with epoxy resin for load resistance. Strong polyester X-weight backing. Fits all 76 x 533mm (3 x 21") sanders for rapid stock removal.
Aluminium Oxide Sanding Belt 5pk
High quality sanding belt provides outstanding life and durability. Made with aluminium oxide grain with epoxy resin for load resistance. Strong polyester X-weight backing. Fits all 75 x 533mm (3 x 21") sanders for rapid stock removal.
60mm Planer Blades for TCMPL
Reversible HSS blades. Compatible with Triton Compact Palm Planer TCMPL and Triton Mini Planer TMNPL. Will also fit all palm planers that accept 60mm blades.
180mm Planer Blades 3pk
Pack of 3 x blades for the Triton Triple Blade Power Planer TPL180. 65Mn spring steel construction. Finely ground edge for smooth finish when planing. Blade length: 180mm / 7-3/32". Blade angle: 50°.
Thicknesser Blades 2pk
Pair of strong HSS steel blades with finely ground edges. Enables fast, accurate material removal. Reversible for a longer working life. For use with Triton Thicknesser TPT125. Length: 317mm (12-1/2”).
Tool Tray / Work Support
Use to keep tools handy or as an additional work support. For use with SuperJaws portable clamping system (SJA200, SJA300 and SJA100XL).
Bar Clamps
Robust steel brackets clamp the extension bars and accessories in the required position. For use with Triton SuperJaws XXL. 48 x 44 x 36mm.
Side Support
Provides support for longer materials. Robust steel construction. Protective plastic covers decrease friction when sliding workpieces over the support, and prevent them from being scratched. 202 x 48 x 157mm. For use with Triton SuperJaws XXL.
Engineers Jaws
Bolt-on jaws and anvil face for heavy duty metal work. Manufactured from strong, ductile cast iron and shaped to increase grip on pipe or bar (up to 50mm, 2" dia).
Extension Bars
Includes two 600mm aluminium extrusions that expand the functionality of the Superjaws XXL. For mounting of other accessories like the side supports or roller supports. With protective ABS end caps.
Log Jaws
Teeth give a tenacious grip for chainsaw work and drilling, sawing or rebating timber logs up to approx. 300mm (12") in diameter.
Roller Support
Roller support with foldable bar stop. Provides support and easy movement of larger workpieces. Height adjustable and tool-free clamping levers. Robust steel construction with aluminium roller. Size 210 x 72 x 238mm. For use with Triton SuperJaws XXL.
1/4" Router Kit 6pce
Premium tungsten carbide cutting edges and balanced, single-piece, high-strength body. Twin flutes for clean, precise cutting. Suitable for use with softwood, hardwood, chipboard, MDF and plywood. Includes core box, roundover bit, Roman ogee bit and 3 x straight bits.
Aluminium Oxide Sanding Sleeves 5pce
Set of 5 sanding sleeves with cloth backing for use with the Triton Oscillating Spindle Sander TSPS450. Includes 60/80/100/150/240 grit.
Track Pack & Connectors
Pair of 700mm track lengths with a pair of track connectors. For use with the Triton Track Saw TTS1400.
Track
Track length 1500mm / 59”. For use with the Triton Tracksaw TTS1400. Also compatible with Festool & Makita plunge saws.
Track Connectors
Pair of Track Connectors to extend overall track length. For use with the Triton Track Saw TTS1400.
Plunge Track Saw Track Cut Strips
Durable rubber strips with peel-off adhesive backing. Replacements for the Triton Plunge Track Saw tracks. Protects the edge of the track when cutting, and prevents the workpiece surface from splintering. Cut to size
Plunge Track Saw Blade 48T
Tungsten carbide blade for Triton Plunge Track Saw TTS1400.
Plunge Track Saw Blade 60T
Tungsten carbide blade for Triton Plunge Track Saw TTS1400.
T Square
Fixed 90° for perfectly square cuts. For use with the Triton Track Saw TTS1400. Can be used with DeWalt, Festool and Makita tracks. Mitre needs 140mm (5 1/2") of track length with or without work clamp.
Angle Guide
Allows quick, accurate set-up for angled cuts. Sets angles up to +/- 55° for precision cutting. For use with the Triton Track Saw TTS1400. Please note mitre needs more than 140mm (5-1/2”) of track length with or without work clamp.
Work Clamps
Pair of Work Clamps to secure the track on the workpiece. For use with the Triton TTS1400 1400W Plunge Track Saw. Each clamp needs 25mm (1") of track length.
Dust Extraction System
Dust management system with semi-rigid 1000ml capacity. For use with the Triton Track Saw TTS1400. High filtering capacity non-woven material. Clear fill indication.
Plunge Track Saw Bag
Plunge Track Saw Bag for use with the Plunge Track Saw TTS1400.
Friction Strip
Friction strips for use with the Triton Plunge Track Saw TTS1400. Peel-off adhesive backing.
Parallel Guide
Parallel side fence for guiding on workpiece. Maintains smooth, constant positioning during cutting. For use with the Triton Track Saw TTS1400. Length 315mm / 12-1/2”.
Friction Strip
Friction strips for use with the Triton Plunge Track Saw TTS1400. Peel-off adhesive backing.
Canvas Bag for 700mm Track
Canvas bag for carrying 700mm track.
Canvas Bag for 1500mm Track
Canvas bag for carrying 1500mm track.
Friction Strip
Friction strips for use with the Triton Plunge Track Saw TTS1400. Peel-off adhesive backing.
Straight Edge Jig
For use with the Whetstone Sharpener TWSS10. Maintains correct sharpening angle. Easy, accurate tool fitting.
Long Knife Jig
For use with the Triton Whetstone Sharpener TWSS10. Use for long or thin flexible filleting knives. Broad clamping head holds blade securely.
Turning Gouge Jig
Turning Gouge Jig for use with the Triton Whetstone Sharpener TWSS10. For controlled, accurate sharpening of woodturning tools.
Carving Tool Jig
Carving tool jig for use with Whetstone Sharpener TWSS10. For accurate sharpening of carving tools and other short tools. Clamps narrow and butt chisels firmly. Internal 'v' shape automatically centres the tool. Will also clamp power tool carving blades.
Scissors Jig
Scissor Jig for use with the Triton Whetstone Sharpener TWSS10. Restores sharp edge to blunt scissors. Can be used on garden shears. Twin clamps for securing blades.
Plane Camber Jig
Plane Camber Jig for use with the Triton Whetstone Sharpener TWSS10. Especially good for scrub and jack plane irons. Puts an even, slight radius onto a hand plane iron. Camber for improved shearing action.
Grinding Angle Set-Up Jig
For use with the Triton Whetstone Sharpener TWSS10. For setting up the correct angle for sharpening. Enables repeatable accuracy for grinding specific bevel angles.
Profiled Leather Honing Wheel
Profiled Leather Honing Wheel for the Triton Whetstone Sharpener TWSS10. For honing and polishing the inside of turning and woodcarving gouges. Honing/polishing V-parting tools. Made from solid tanned leather.
Pre-Dressed Grindstone
Pre-dressed grindstone for use with Triton Whetstone Sharpener TWSS10. 220 grit.
Stone Grader
Stone Grader for use with the Triton Whetstone Sharpener TWSS10. For dressing the grinding stone.
Diamond Truing Tool
Diamond Truing Tool for use with the Triton Whetstone Sharpener TWSS10. Quick restoration of the grinding surface. Back bar controls rate of material removal. Easy to set up.
Support Arm Extension
Support Arm Extension for use with the Triton Whetstone Sharpener TWSS10. Attaches to support arm. Provides simultaneous tool support above the grindstone and honing wheels.
Metal Polish
For use with the Whetstone Sharpener TWSS10. For dressing the leather honing wheel.
Machine Cover
Machine Cover for the Triton Whetstone Sharpener TWSS10.
Workcentre Dust Bag
Easy-fit dust bag with detachable pouch. Combined with a vacuum connection to the overhead guard, this dust bag collects almost 100% of the dust created in tablesaw mode. Compatible with MK3 and Series 2000 Workcentres. Dust Bag model DCA100 required for Triton Saw Table. Includes vacuum hose and bayonet and tapered hose connectors.
Maxi Sliding Extension Table
Huge capacity and easy-to-read calibration scales allow operator to cut large sheets, including full size 2400 x 1200mm. Table can be locked in position for conventional ripping of wide workpieces. Sliding table for panel saw use. The patented rip fence design allows fence settings at all angles. Incorporates work hold-down clamps.
Mini Sliding Extension Table
Provides a substantial increase in rip and crosscutting capabilities. Unique multi-position fence for mitre and taper cuts with crosscut up to 600mm and conventional rip to 1000mm. Folds for storage. Compatible with all Triton Workcentres.
Blade Height Winder Kit
Provides quick and precise blade height adjustment. Control blade height by a winder through the table slot or by thumb wheel in crosscut mode. Allows your saw to remain at its full depth, in its most stable position. Suits Workcentre System Series 2000, including WCA201, WCA200, WCA001.
Saw Stabilising Bracket
Triton Stabilising Bracket facilitates accuracy when using the Triton Workcentre. It minimises saw deflection when cutting under load, and saw slump when the saw is changed from the table saw to the crosscut mode or vice-versa. The bracket is fully adjustable for various cutting depths and angles.
Saw Table Dust Bag
With a vacuum attached to the overhead guard, using hose supplied, this dust bag system will collect almost 100% of the sawdust created. Compatible with the Triton Saw Table.
Retractable Wheel Kit
Pair of retractable wheels provides easier mobility for the Series 2000 Workcentre. They cope with rough terrain and can even climb steps. Retractable for stability when workcentre in use. Easy to fit. Durable long-lasting construction
Dust Collection Guard
Overhead guard and guard support that connects to the Triton Work Centre.
Bevel Ripping Guide
Enables accurate bevels and chamfers from 15° through to 90°. Compatible with Triton Saw Table TCB100. Fully adjustable to handle long and wide workpieces. Accurate control for short bevels and perfect compound mitres. Integral calibration scales for easy alignment. Full instructions including guide to bevel angle settings required for the most common shapes.
Bevel Ripping Guide
Enables accurate bevels and chamfers from 15° through 90°. Makes use of the Workcentre protractor for control of short bevels and perfect compound mitres. Fully adjustable, for bevelling or chamfering of long and wide pieces. Fits Triton Workcentre System 2000 directly; adaptor kit available for earlier models.
Biscuit Joiner
Triton’s unique Biscuit Joiner quickly fits to the Triton Router Table for fast, strong and invisible joints. Ideal for bevel, mitre, rail-to-stile, edge-to-edge, end-to-end, rail-to-post, edge-to-face, right angle joints and other forms of edge joinery. Includes TCT cutter and pack of biscuits. Additional biscuits available in packs of 50 (BJA050) and 500 (BJA056).