TRT A001

Kit adattatore per la fresa a immersione

Robusta piastra di base cromata e piste guida che creano un complesso di accessori solidi e resistenti agli impatti. Il meccanismo di fissaggio rapido assicura la massima velocità e il minor sforzo al momento del fissaggio della fresa alle piste guida. Compatibile con le frese a immersione Triton.

Caratteristiche prodotto

Regolazione precisa per ottimizzare le operazioni di fresatura
Scomposizione in due parti per una conservazione compatta
Piastra di base cromata che diminuisce l'attrito con il pezzo
Connette facilmente le frese Triton a una pista guida per una maggiore stabilità e una maggiore precisione di taglio

Caratteristiche tecniche

Altezza prodotto 90 mm
Lunghezza prodotto 200 mm
Peso prodotto 1,5 kg
Larghezza prodotto 210 mm


Compatible con


Pacco di piste e connettori

Coppia di piste di 700 mm di lunghezza con una coppia di connettori. Per l'uso con la sega a traforo Triton TTS1400.

Per saperne di più
TTS T1500


Lunghezza pista 1500 mm. Per l'uso con la sega da traforo a immersione Triton TTS1400. Compatibile con seghe a immersione Festool e Makita.

Per saperne di più

{0} valutazione/i

9 Review(s)
Good product, works with Festool rails (I do not have Triton rails to try it on). Fit on the TRA001 is easy and precise. Works well if you have the overall size on the project to use these as a line up in place of a table.

Track Adapter Zach Tymchuk - 28/01/2020

I was sick of trying to build jigs to cut dados or run a router in a straight line predictably. Having the ability to use my track to guide the router has saved my bacon and produced far more accurate results.

Best router accessory ever Neil Dorin - 15/06/2019

Purchased unit to cut slots for shelf standards in a 6 ft. tall cabinet I am building. After cutting seven slots for the standards I found the unit works quite well. Had more problems with the Triton track lying flat at the end of each section, having to stop at each joint to hold the next section of track down so I could proceed with the cut. The unit appears to only work with Triton router bases due to how it attaches to the base. Overall it did the job it is supposed to do.

router track adaptor Larry curran - 21/12/2018

Functional, accurate and efficient.

ROUTER TRACK ADAPTOR Thys Manganya - 27/11/2018

I purchased the TTSTP to use with my TRTA001 router track adaptor. The two tracks fitted together well when I needed to joined the two halves They stayed last on the work surface and for most applications with my router track adapter they have worked well. My major criticism and disappointment is that hey are totally incompatible with the longer Triton track TTST1500. I would have liked the ability to join a 1500mm track to a 700mm track and only have one join. This would have been a more useful option with the plunge saw.

Useful TTSTP Track Mike Gane - 24/03/2018

I purchased this track adaptor to compliment my Triton MOF001 router. It has been very useful and has allowed me to router far straighter channels with far less effort. It is easy to attach to the router and easy to attach to the guide rail. The micro adjustment has allowed me to route wide channels with ease. This has been a very worthwhile addition to my workshop.

TRTA001 Router Track Adaptor Mike Gane - 24/03/2018

I purchased the MOF001 primarily to use with a router table. It's a brilliant piece off kit. I am very impressed with the way in which the router can be raised and lowered from above the table and the fine adjustment mechanism. I have since purchased the Triton Track adaptor and the Triton track to go with it. I've not had my MOF001 router for very long, but I'm already very pleased with it and would purchase it again.

Top Router Mike Gane - 24/03/2018

Moje prvo iskustvo u radu mi je otkrilo savršen jak i siguran alat. Oduševljen sam sa njim. Hvala za ovako odličan alat.

Dual Mode Precision Plunge Routewr 2400W TRA001 Router Track Adaptor TRTA001 Ozren Kolic - 28/02/2018

Works well with a Makita track.

Great Product Dave Myles - 20/12/2017