Hochleistungsfähige Dickenhobelmaschine mit einer Hobelbreite von 317 mm (12 1/2 Zoll). 17.500 Schnitte pro Minute. Einfache, präzise Hobeltiefeneinstellungen in 1,6-mm-Schritten. Messerhöhe: 3,2–152 mm. Stufenlose, präzise senkrechte Einstellungen durch Vier-Säulen-Konstruktion. Große Auf- und Abnahmetische bieten verbesserte Auflage für lange Werkstücke. Mit Sicherung für elektrische Sicherheit. Effiziente Staubabsaugung dank Absaugtrichter.
1 Paar HSS-Wendemesser mit fein geschliffenen Klingenkanten für schnellen und präzisen Materialabtrag. Lassen sich umdrehen und nachschärfen für eine noch längere Standzeit. Für die Verwendung mit der Triton-Dickenhobelmaschine. Länge: 317 mm (12 - 1/2 Zoll).
I'm new to planing. This is a great entry point. I'm helping my daughter use Pallet Wood for art projects and this has been terrific!
Triton Thicknesser 125Bob Haber - 01.03.2020
My first Triton power tool and I am so very impressed with the quality, ease of use and finish produced by the thicknesser. a great value for money purchase.
Planer ThicknesserNoel S - 28.02.2020
The reason I bought this thicknesser is because I live on Gozo, a small island north of Malta. On this island you cannot buy wood to size and plained. After a lot of research and looking at many reviews I decided to take the plunge and purchase this item. I must say I have not been disappointed, in fact I have been blown away with the quality and performance. It is very accurate with the sizing and the after plaining very little sanding is needed. It is very simple to use and set up from unboxing. I cannot praise it enough and highly recommend.
I purchased this machine as a part replacement for a multi-function machine which was too large for my requirements. I looked long and hard at the benchtop thicknessers on offer and noted the favourable reports on the TPT125. (and its selling price!!)
With a minimum of fuss, the machine was up and running more or less straight out of the box. It has performed flawlessly from day one. It does all that I need (As a geriatric DIY enthusiast) and appears to be robustly built.
The end product is consistently well finished and it is simple to plane to close tolerances (Just what an old buffer requires!!!)
I made the right choice and would recommend it to anyone who wants a robust well built machine. Can't comment on its longevity, but it looks as though it will outlast me!!!
I bought this thicknesser having read lots of reviews and viewed comparison tests on youtube. I also considered a combination planer thicknesser, but the having to switch between modes was cumbersome. I am very impressed by the smooth almost polished surface this machine produces, often smooth enough to require no sanding at all. The machine handles the hardest oak with ease, with fine adjustment and minimal snipe. The cutting head is also well protected so the design is inherently safer too. I only wish I had bought this thicknesser years ago.
Fantastic purchaseJohn Holt - 25.02.2020
Excellent product.. Excellent finish no need to plane I would highly recommend this product
Well worth the moneyThomas Cooper - 22.02.2020
After minor setup (leading & trailing tables), planer ran well with very little snipe which is unusual for a portable planer. Most valued was how smooth the board finish was on the final pass. Considering the TPT125 has only a two-knife cutter this is very impressive and required almost no final sanding. The unit comes with a reversible dust chute which connected easily to my shop vac hose and evacuated the shavings efficiently. I would highly recommend the TPT125 for light to medium woodworking usage.
Good Quality PlanerDan Prusia - 18.02.2020
I bought the thicknesser last christmas. The dimensions of the thicknesser a great for a small shop, like I have it.
The thicknesser work very well by now, I had no problems with the thicknesser. I hope, that I will have a long time fun with the thicknesser and if not you have 3 years warranty!
Greetings from Germany
Very good Trition ThicknesserThomas Mursec - 16.02.2020
This tool is fantastic. I'm so impressed with the quality smooth surface it produces
It's compact, I have placed it on a flip top stand with a bench drill on the opposite side as I am limited in space.
Don't hesitate buy it
I reviewed all the different models and the various Youtube comparisons and came to the conclusion this thicknesser offered the best results with low level snipe and was excellent value for money. I considered a combined planer thicknesser, but again watching various reviews they came across as fiddly to use, having to constantly switch between modes so I opted for just the thicknesser. I haven,t missed the planner function. I have found the thicknesser to be excellent producing a near perfect finish, requiring little sanding, the 4 column design gives a very stable cutting head. I have used it on 280mm wide oak with no difficulty at all, more thinner slices works best.
Overall very impressiveThe Otter Man - 11.02.2020
I can only say that Tritontools make fantastic products I am over the moon with my Thicknesser planer it works great and the finish on the wood is fantastic you don't even have to worry about sanding after using the thicknesser. I would highly recommend tritontools 10/10 from me
TomThomas Cooper - 08.02.2020
I purchased the Triton 1100W Thickness Planer which to my surprise was quieter than previous brands I have used. The Triton also seems much more powerful and has no problem with hardwoods.
After about three months the planer started making a loud noise, like a nut was bouncing around inside. I contacted Triton support and was sent a return label to send the planer back for service. It appears they have found that some of the planets do not have enough grease in one of the bearings. The planer will be shipped tomorrow for service.
I was quite happy with the customer service provided.
Excellent product. Bit of snipe but will try and eliminate that as much as i can with feed adjustments etc.. Finish on wood is excellent and probably doesnt even need sanding. Not used it enough to test reliability in long term but seem very well built. Haven’t used triton tools before but will seriously consider them as an alternative to the main brands in the future. 4 stars for now as I've not used it enough yet to test reliability but so far so good.
ThicknesserJohn Lennon - 21.01.2020
I have used this planer to bring rough sawn lumber to a good finish and thickness. Compared to the planer it replaced, there is no comparison.
1100W Thickness planerGordon K Cotton - 20.01.2020
Did his Job, machine ist plastik ( hardplastik not cheap one ) Knifew were preinstalled and in right position, so you can directly start to plane with it. A little bit problems with the dust Collection, it does not really work, but it;s ok. I can say it is a good amateur planer with very good results
Good Planer, for reasonable price. Best for amateur woodworkingKotsis Markos - 19.01.2020
I was looking for a portable planner with enough power, that fit my budget. This is a home run, if you take your time this planner can give you amazing results. I have done cherry, oak and maple boards and it’s eating them up, with minimal chipping.
The customer service is excellent also, the blades that came with the machine did not perform well. I told them of the issue, thinking maybe the blades just were dull. They sent me a new set no questions asked. I installed them and it working perfectly. Very happy with the product and the costumer service.
TPT125Shadrik Sherrington - 17.01.2020
je trés content de votre produit ,rabotage impeccable aprés un reglages minutieux et nombreux essais c un plaisir de travailler avec
rabot TPT125pascal dunez - 14.01.2020
This is a tool recommended to me and I cannot believe I did not get this in my armoury earlier! Brilliant smooth and consistent finish of rough sawn timber, which is just about ready for final finish! Extremely happy with my thicknesser!!
Fantastic planer!!!Grant - 14.01.2020
Very good product work very well and easy to use and understand will definitely buy more.
ThicknesseserTommy Sayer - 12.01.2020
very easy to set up and use. I would recommend highly.
TPT125 thickness planerGordon K Cotton - 06.01.2020
I am using the tpt125 for just a few weeks, but am very pleased so far.
It works flawlessly, was easy to setup and provides good planing results.
At the moment I think i got good bang for the buck.
Using the TPT125 TicknesserAlexander Schulz - 05.01.2020
Pas encore essayé, mais apparemment robuste
raboteuse tritonchassat - 30.12.2019
Great for price easy to set up
Good for priceTom lambourne - 24.12.2019
Having purchased the thicknesser several weeks ago I have used it to resize material to dimensions you are unable to purchase at normal timber suppliers (there are suppliers that will cut and plane to your required dimensions but charge at least £20:00 plus carriage) it doesn't take a genius to work out that you will soon recoup the cost of the thicknesser, also I now purchase "sawn" timber and plane it myself for roughly 3/4 of the cost of off the shelf planed timber.
So far the finished face of the timber has been flawless, I note that some revies say you have to waste the first and last couple of inches of timber timber due to "snipe" I have found that by adjusting the feed plate slightly, feeding the timber flat on the feed plate and on longer pieces have a support, ideally a Triton Multi Support Stand, the problem is eradicated.
The instructions are clear and concise and there are helpful instruction videos on YouTube.
It is a heavy machine and requires a substantial stand, I built mine to meet my personal requirements. It is not a machine suited for continuous commercial use but then is not sold as such. All in all exellent value for the price.
TRITON THICKNESSERROGER SELLAR - 06.12.2019
Product works very well. When factoring in the price reduction of this tool compared to other thicknessers the same size, this tool is a great deal. It leaves a very smooth finish, with an average amount of snipe and doesnt bog down.
12.5" thicknesserDavid - 05.12.2019
An excellent machine, a slight adjustment on the feed plate eliminated any snipe, extremely good finish to, virtually no sanding required.
Pound for pound probably the best tool I have purchased for ages
Working with a Triton TPT Thickness PlanerROGER SELLAR - 21.11.2019
i got the thicknesser as a gift for my birthday. it is a really good tool with good performance and good performance on soft and hardwood. i had to contact the triton support because of an issue with the thicknesser. i got immediate response from support and within one day i got a free return shipment to triton. after another day i got informed that i get a new replacement thicknesser. that is what i call a really good support!
Really good ThicknesserFlorian Hausleitner - 10.11.2019
Great bit of kit
Titan PlanerChris Maitland - 05.11.2019
Easily assembled, only needed to fit extraction and height adjustment handle. However manual suffers from poor images and inadequate information on changing blades (but found good demo on you-tube). The thicknesser is well made, accurate and produces a very good finish. The 3year guarantee instills confidence Tested on a 100mm square piece of hardwood and two pieces of 300mm wide board. Slight snipe on 100mm but none on the boards. I would recommend this to anyone requiring a robust thicknesser.
Robust and accurateIan Millington - 04.11.2019
A prefect machine for my purposes. Compact yet with dimensions of 317x125mm. I recommend to every workshop.
TPT 125Frantisek Mazanec - 31.10.2019
Great product, gives a fantastic smooth finish
ThicknesserChris - 25.10.2019
It Is heavy enough to move it. To make it stable it is good to screw it to table or workhorse. Runs good so far and fot this price it seems as excelent choice.
thicknesserMichal Poc - 22.10.2019
The salesman who sold it , told me exactly what it said on the tin, PERFECT ALSO
The Demonstrater was ALSO IN THE SAME CLASS BOTH FROM THAT VERYSAME TIN--PERFECTION -The -Machine is a PERFECT TOOL FOR ANY SHED OR WORKSHOP GREAT STUFF Triton Thank you so much pleasure to Use THANKS a Million Times ,PERFECTION ALL ROUND TO THE MACHINE AND THE TEAM WHO SOLD IT TO ME , THANKS AGAIN CHAZ BUSH
1100wThicknesser317mmChaz bush - 18.10.2019
The Triton thicknesser is a planer that not only planes the wood but is so good that it leaves the wood polished as well even pallet wood
You start to wonder if the wood needs sanding and yes the machine is quite and powerful
I am really pleased with it and I can also mount it on my triton super jaws
I always think the name Triton stands for Try it On beacause when you try their tools you don’t want to be without them
The polish ThicknesserGerald Cochrane - 18.10.2019
I have owned this product for a little over a year and passed many hardwoods and softwoods through the product. The product functions very well, although I found it requires in-feed and out-feed rails to avoid snipe. I try not to remove more than 0.8mm per pass (1/2 turn) for best results. This leaves a very good surface finish that requires very little additional finishing.
After 14 months I did have an issue with the thicknesser and contacted Triton, support, they were very helpful and after returning the item they fixed the problem (a faulty switch) as well as replacing blades and other aged components free of charge. Despite the initial fault, the great service gave me additional confidence in the brand and I would be happy to recommend.
Good Value Product - Would recommendMichael Aldridge - 16.10.2019
I've really enjoyed this product. The wait was worth it, but I wish I had known up front it wasn't available.
Love it!Lynn Hunt - 12.10.2019
The TPT125 is a great addition to my small workshop. Does what I need it to. Gives a good finish. It’s really good that you can thickness over 300mm wide. Easy to use and set up. blade changing is pretty straight forward and blades our reversible and locate on pins so no need to set them when changing. Only a couple of down sides, one is it only has a 50mm dust extraction. Would be good if it had 100mm. The other is that it’s the loudest tool I own now. Great for the money.
The TPT125 is a great thicknesser.Craig Harris - 05.10.2019
I have had the thicknesser for a little over a 18 months and used the product for hardwoods and softwoods. Overall I am happy with the product, it is good value and does a good job. I find it works best when removing 0.5mm at most, otherwise you begin to hear the motor struggle. For this reason, it probably isn't the product for heavy usage, but ideal for the more casual user. Also, I had to build a in-feed and out-feed rails to remove snipe, I think you will probably find this is essential to avoid wastage.
Recently the saw did fail me and stopped working midway through a project, I returned the product to Triton under warranty and pleased to report they were easy to communicate with and quickly repaired the product for me free of charge. I understand that tools break from time to time, so do not blame Triton for the initial failing, but they did a great job rectifying it.
Good Product at a Great PriceMichael A - 02.10.2019
I've been wanting a thicknesser for a while and after careful consideration I went with this one, and I'm so glad I did! It's a brilliant machine, provides a great finish and has sped up my production considerably. It's well built, and not too noisy too!
A vital piece of machinery in my workshopRichard - 25.08.2019
Solid tool for the money. Does what is should do and was easy to setup. Dust extraction worked good together with a wet & dry vacuum cleaner. I'm really happy with this tool.
Value for money!Sven Klein - 16.08.2019
I bought this thicknesser to plane some green oak roughly sawn. The condition of the timber was really poor: warped cracked knotted with moisture. This machine produced timber which didn’t need any sanding very easy to use. The only problem I found was connecting it to my vacuum cleaner I had to buy an adaptor. The saw dust can accumulate and block the exhaust. Otherwise it’s a great purchase highly recommended.
Great machineAdam Zaki - 30.07.2019
Brilliant piece of kit, easy to use, great results. First use was to re-work some old scrap wood to make a fancy picture frame, used a jointer to flatten the pieces first then ran them through the thicknesser to get the thickness and finish I wanted.
Triton bench top ThicknesserPeter Timbrell - 18.07.2019
A good solid unit, easy to use and gives a good even finish.
1100W ThicknesserPeter Timbrell - 06.07.2019
Newer into the world of wood working and did my research. Based on the money and it’s overall output, it’s worth every penny. Head to head test competes with devices double in price.
Wood Planer - Worth every pennyBen - 04.07.2019
I'm surprised how good is the thickneser, works perfectly with softwood and hardwood and it has significantly lower energy consumption comparing to others similar products on the market.
Highly recommended for everyone.
1100W thickneserGunvaldis Vanags - 02.07.2019
Facile da usare, fa il suo lavoro, e a un buon prezzo. Utilizzata anche per squadrare tavole storte o arricciate con appositi jig!
OttimaClaudio Valvo - 01.07.2019
Very easy to set up, it gives a good finish to your wood. And a very low price on the market. The 3 years warranty is a nice plus.
ExcellentClaudio - 30.06.2019
Bought the machine one month ago and it seems like it's doing the job. I have been watching few others, and all in all i think I didn't make the mistake.
Aldo there are some annoying things like when you're plaining, first and last few centimetres will have a little dent. But it probably can be fixed with putting some MDF 317mm wide, and twice longer than the surface is now, or with a spare piece that will go before and after the piece you are plaining.
Otherwise, machine works just fine, and it's not so crazy loud if you compare it with some other models..
Thicknesser 317mmMario Matijasec - 27.06.2019
Great tool couldn't do the job without this
Cuts time down and good finish to wood
Triton thicknesserKaren Marshall - 27.06.2019
Sheep und verry good
Top ProduktThorsten Br&#252;ning - 24.06.2019
Excellent machine, really good finish on planed wood. For the price, very nice piece of equipment. Very satisfied.
TPT125Davor Briski - 15.05.2019
GreatFabio Nardin - 14.05.2019
Ich nutze den Hobel im Hobbybereich. Für den Preis ein klasse Gerät. Klein genug um unter einem Tisch ein en Aufbewahrungsplatz zu haben und auch nicht zu schwer. Sehr gute Oberflächengüte der bearbeiteten Hölzer.
für meine Anwendungen genau richtigThilo - 12.05.2019
I bought the 1100w Thicknesser 317mm, as I home school my kids, I wanted to teach them that using old wood and reusing it, is more sustainable than chucking away old pieces and then going out buying more! The expression on their faces when the wood came out of this Thicknesser was priceless "old wood went in new wood came out" , the quality is second to none, excellent piece of Engineering easy to set up and use my kids are 10 and 12 years old and they can set up and use it (under supervision) . The kids and I love love love this machine. 5 stars definitely. Don't delay buy today!
AmazingDean Vye-Parminter - 25.04.2019
This is my first planer. So I don't have much to compare to. But it does a great job.
Minimum snipe since the rollers are close to the blades. Also the comments if people complaining the table can't fold up when the dust shroud is on are false. The table does fold up when turning the blade all the way up.
Great value for moneyRick - 24.04.2019
Picked up this at Rocklers, it was Last piece so it was on a discounted price and had came with 2 free blades.
It was boxed properly, I found no Damage to the planer. but I was missing one of those small magnets, so that was disappointing.
My Initial use, It planes really smooth, does leaves snip at both ends, I think I need to adjust in feed and out feed table little. otherwise I like how it worked.
Dust Shoot is good and I am able to collect 95% of saw waste with my small shop vac.
what I don't like about it is that Dust Shoot need to be attached with screws, so you can't just take it out easily if you want to close the out feed table. I wish Triton will start making easy attach and remove shoots for this.
over all I think it is very good for the price.
1100W Thicknesser- Good Budget PlanerAbhilash David - 31.01.2019
Works very well
Very good qualityNigel shilcock - 29.01.2019
Great tool for any planing needs. Easy to set up and change the blades and easy to maintain. Only 1 problem I had was it starting making a noise not long after I had purchased it and there were some Alan key bolts slightly loose on the chain drive which I had to tighten and with and on some pieces of wood it struggles to pull it through but mainly heavier or denser pieces of timber.
ThicknesserDaniel Gardiner - 29.01.2019
Received this item for Xmas ( under guidance} what a great product. Fantastic finish to both soft and hardwood. Next to no snipe if you are patient with your cut adjustments. Best I’ve used in this price range, 100% recommended.
New giftRob chapman - 28.01.2019
This bit of kit is the best thicknesser of its size for the money. It does everything its meant to do extremely well with little effort. Out of the box and set up in about ten minutes. A couple of passes with some scrap timber to set the feed tray level and away it goes. The finish it produces means no sanding is necessary.
I highly recommend this machine as for the price it cannot be beaten!
Brilliant machineMike - 23.01.2019
Only used it once but I was really impressed. I was only using softwood but the finish was excellent
Triton thicknesserAnthony Fletcher - 22.01.2019
Got this machine about 2 months ago. I have to say that I’m very happy with it. Great machine. Good value for money.
Triton ThicknesserVincent O Connor - 21.01.2019
I have been using the Triton thickness planer for about six months. Has produced good results on all types of wood. Very happy with the results.
A key proof point is service. I recently mis-fed some wood (which eject the wood along with making some horrible noises), after which the planer was cutting gouges and producing very poor quality cuts. I emailed with Triton support and they offered the option of either sending the machine in for repair under warranty or sending me two parts to replace myself. I opted for the latter. In a matter of a few days I received the parts, replaced them, and was back up and running with the original high quality cuts.
I could not be happier with my experience with both the tool and the level of support I received. Would definitely recommend this tool to others.
Thickness planer. - great tool and excellent supportDavid Jenkins - 17.01.2019
Prima Dickenhobel mit einwandfreier Verarbeitung und stabiler Bauweise. Er arbeitet sehr genau und die Oberflächen des Holzes werden perfekt, dazu ist die Maschine für einen Elektrohobel nicht übermäßig laut. Die klappbaren Holzauflagen auf beiden Seiten sind mittels Stellschrauben sehr genau einstellbar, um eine ebene Gesamtfläche zu erhalten. Ich bin mit diesem Dickenhobel sehr zufrieden!
Super Produkt !!Johann Radlmaier - 11.01.2019
I purchased the TPT125 to plane rough Australian hardwoods (jarrah and sheoak).
It came well packaged and it requires minimal assembly. Installing the crank handle for the adjusting the stock thickness and the dust extraction chute only takes a few minutes.
The instruction manual is well written and self explanatory, although the poor quality and lack of resolution in the photo illustrations forced me to download an electronic copy so that I could view the photos.
The manual recommends that test cuts are made with 2 pieces of stock on either side of the planer to verify that blade alignment is correct. My test pieces were both the same thickness so I didn't need to carry out the realignment procedure described in the manual.
The overall build quality of the TPT125 is excellent and much better than I expected.
TPT125 Thicknesser ReviewAlan Bax - 30.12.2018
Spedizione con amazon ottima. Provato l'utensile e sono soddisfatto dell'acquisto, il mio utilizzo è del tipo hobbistico. L'unico inconveniente che ho riscontrato per il momento è che l'inizio e la fine della tavola da piallare riscontra un piccolo avvallamento rispetto alla rimanenza della tavola piallata.
triton tpt125Toffoletto Maurizio - 29.12.2018
The machine is running very well and has no issues doing its job. A little loud...
I'm impressed with the quality of the wood surface. Tried to setup the feeding and outfeed tables very well but still can see a slight snipe that can disappear with a little sanding.
The only thing missing is the cutting depth gauge that is available on similar products.
Handy thicknesserAntoine - 28.12.2018
Great machine, I wish I had bought one years very easy to set up and use , saves a great deal of time and effort Smoothing rough timber and with a 3 year warranty what’s not to like
Tritón thicknesserBill Holford - 23.12.2018
Great bit of kit and a really smooth finish can buy much cheaper wood and turn it into what I need
1100W Thicknesser 317mmIan wake - 15.12.2018
Ich habe mir das Teil gekauft , weil ich keine 650 Euro für eine Makita oder Metabo hatte. Anfangs habe ich Angst gehabt, dass die Maschine nicht stark genug sein wird, aber sie macht das sehr gut! Solide gebaut. Hobelergebnis ist mega cool . Am Anfang und am Ende Hobelschlag system bedingt, man kann aber Opferbrett benutzen oder absägen... Ich kann sie jedem absolut empfehlen.
Top Maschine!!!Andreas - 15.12.2018
ich mag den Hobel. er ist fertig verarbeitet, ist einfach zu bedienen und macht einen super Job. Die Flächen sind glatt und sauber und er spart mir eine Menge Schleifarbeit. Der Service der Fa. Triton ist ebenfalls lobend zu erwähnen.
Super Produkt toller ServiceSven Pomnitz - 13.12.2018
I'm very pleased with this product I purchased. I use it on daily basis. It's light, easy to work with and real helper in my workshop. It's definitely 5-star tool.
Triton thicknessertomas hruska - 13.12.2018
Bought by wife for Xmas present. And love it. Use for hobby but what a machine. Love it. Thanks
WowSteven Massey - 12.12.2018
Having being a Triton tool owner/user for twenty years,I'm not new to Triton products, having said that, this new addition is the first for sometime. My confidence in Triton and this tool has once again proved to be a good investment and I would recommend the TPT 125 to anyone as the best 317mm planer on the market.
Perfect for the jobBruce Gardner - 05.12.2018
I have long wanted a thicknesser and have finally I took the plunge. My the heck I didn't do it earlier I just don't . I can accurately size wood for any project and more to the point recover usable timber from scrap, rough cut timber and timber recovered from old furniture and fittings. I love it, its easy to use, transportable and, although it will cope with 12" wide, very compact.
Answer to a dream!Paul Singleton - 01.12.2018
Great tool, well engineered, very accurate and easy to use. Excellent value for money.
Triton ThicknesserGreg Gilbert - 28.11.2018
La machine est prête à l'emploi au déballage.
Après essais sur sapin et chêne, la surface est régulière et lisse, le ponçage n'est quasiment pas nécessaire.
les extrémités des pièces rabotées ne présentent pas de différence d'épaisseurs par rapport au centre.
Excellent matériel puissant et précis.
Raboteuse d'atelierTHOR&#201; - 24.11.2018
Der Dickenhobel ist sehr gut einstellbar und die Oberflächengüte ist hervorragend. Die Lautstärke ist im erträglichen Rahmen. Der Hobelschlag dürfte etwas geringer ausfallen. Alles in allem bin ich sehr zufrieden und würde das Gerät auf jeden Fall wieder kaufen.
Sehr zufriedenHolger - 23.11.2018
Very pleased with this item, no setting up required can use straight out the box, planes very well boards came out with no need of sanding, very smooth finish. Outstanding piece of kit half the price of other brands but excellent quality, I would definitely recommend this thicknesser.
Fantastic thicknesserSimon Clayton - 21.11.2018
An excellent machine, easy set up, excellent work performance and great value for money.
Triton ThicknesserGreg Gilbert - 14.11.2018
quick and simple to assemble nice clean cuts and not all that noisy for a thicknesser All up very happy with it
triton thicknesserEric Hall - 11.11.2018
An excellent piece of equipment for the price. Sturdy, hardwearing and massively functional.
I would recommend this unit to any diy enthusiast or semi professional hobbyist.
Quality at an affordable priceHal Lepic - 09.11.2018
Best Buy of the year for me, very simple yet good tool one of the best in its class
Plane simpleJon - 08.11.2018
Great value for the money
Triton ThicknesserBostjan - 07.11.2018
Bought this planer/thicknesser to prep reclaimed floorboards for our renovation. Results were far better than I could have imagined and when there was an issue Triton repaired the planer immediately and so well that it was like having a new planer all over. Highly recommend
All you will needBryan O&#39;Neil - 06.11.2018
I am very pleased with this machine,it’s good quality.does a great job,the finishing on hardwood is fantastic .thanks very much.
MrRobin Thompson - 06.11.2018
Going for the Triton Thicknesser was one of the best decisions made in a good while. While it was not the most expensive the manufacture and end product has covered all our requirements and we can see no reason why it shouldn't continue to do so.
Very pleased with the service from Triton Tools and when looking to replace any other tools or machines they will continue to be first on the list to refer to.
Who said I was ThickJohn Froment - 06.11.2018
There is some good reviews on this tool already and I support all the positive reviews, this unit is as good as most of them say and I would recommend it to a friend.
GREAT VALUE TOOLDAVID DENHOLM - 06.11.2018
Great product! Planes my guitar body and neck blanks to thickness perfectly every time. Also works great for any little DIY or joinery job where I need smooth, parallel surfaces at an exact thickness.
THicknesser ReviewAdam Winter - 24.10.2018
Fantastic, once set up up properly to avid the snipe it's an great machine. I've had this planer running for a month now and the blades still give a very good finish, and it comes with a 3 year warranty
Would I buy this machine again, yes I would highly recommend
Thickness planerJonathan batty - 23.10.2018
Great value and great performance. Would recommend
ThicknesserMark Gaines - 23.10.2018
I can highly reccommend the Triton Thicknesser. I work with a variety of hardwoods and the finish is comparable to machines of a much higher value. Very pleased with the quality. Blades very easy to change. Overall 5/5
Triton ThicknesserPhil Kaye - 23.10.2018
I am really impressed with this machine, still cannot believe that such a tool was available at that price and sure the competitors to this machine at double the price can be no better? although I have never owned such a unit before it is just sheer pleasure to use and not as loud as some suggest, would highly recommend.
VALUE FOR MONEYDAVID DENHOLM - 23.10.2018
100 per cent good quality
TritonR.a hales - 23.10.2018
The type of work I do 9 times out of 10 I cannot buy the right thickness of wood.
So by having this bit of kit it’s fantastic being able to plane just a mill or two off.
Thickness plannerChristopher prew - 23.10.2018
Great product! I have been using this planer for a couple of months now and never let me down. The planed surfaces are smooth and by adjusting the in- and outfeed tables, snipe is eliminated. Very Happy with my buy.
TPT125Ruud - 23.10.2018
After carefully researching thickness planers for my very small wood working shop, I chose the Triton Thickness Planer. The results from my research compelling my decision were the manufacturer’s reputation, the testimony of other owners over a sufficiently long period of time and, eventually, a discounted price from Rockler. Upon receipt, I found a small defect on the center table and contacted the US services for warranty coverage. The replacement part was sent quickly and was easy to install. The performance of the machine amazes me. The accuracy of specified height of blades to thickness is spot on as is the accuracy of incremental adjustment measures. The evenness of cut across the entire length of the blades is incredibly even. The resulting smoothness of cut is hard to believe, but proven by touch. Since I have owned and operated this machine for only a few months, I cannot speak to durability. However, initial assessment is that this is an extraordinary tool for my purposes.
Best Planer I’ve Ever OwnedJohn Cook - 05.07.2018
Very easy to use. Saves me a lot of time by not sanding. Is very dependable and well built.
PlanerRobert Pena - 13.06.2018
good tool well made no problems so far
brutusc c peel - 11.06.2018
Perfect finish, easy to use. No planer snipe at all. Recommended.
Quality toolMark - 01.06.2018
My days of sanding rough lumber with a belt sander are over. the Triton Planer planes the lumber so smooth, sanding is not necessary. It is easy to use and is very dependable and saves me a lot of time. I wish i would have bought the Triton Planer years ago.
PlanerRobert Pena - 31.05.2018
This is a great tool, it costs 150% more than the cheapest thicknesser you can buy (Titan) but it better by miles. I have used this for cleaning up pallet wood and even tree trunk slices and it copes with any wood easily.
It does take a little getting used to and I find taking off small amounts works best on hard and soft woods to get a great finish that needs very little sanding.
The item is heavy ( Ive made a trolley for mine so it rolls under my workbench when not in use.), sturdy and well built and I think a professional would be happy with this tool. So far I cannot find anything negative to say about this tool hence my 5/5 rating.
ThicknesserAnthony Jones - 31.05.2018
It's really good piece of equipmemt and gives fantastic results and finish withoit need for additional sanding. Happy with the purchase.
Triton Tchicnesserireneusz ogieglo - 31.05.2018
I needed a thicknessor for some projects I have going so I read reviews on verious manufacturers and chose the Triton. I am so glad I did, it was setup straight out of the box from the first run through of a length of rough timber you could see the quality of the cut. the only con I have found is on pieces under 18 inches long there is some snipe but on longer boards the snipe is gone. I would recommend anyone think of a thicknessor to serious look at this Triton machine.
quality peice of kitSam Johnston - 30.05.2018
easy to set up very good for price
brutusc peel - 24.05.2018
Having owened the Triton 3hp router and 9 inch circular saw for over 12 years without problems I new the brand was reliable and excellent quality. When my 14 year old Delta Thicknesser finally stopped working I did not hesitate in considering the Triton TPT125 along with models from Makita, Metabo and Dewalt. After all considerations the Triton model won hands down, not simply on price but on features. Minimal set up was required straight from the box, requiring only 10 minutes to ensure the infeed/outfeed tables were perfectly level to ensure minimum snipe. This machine has handled Beech, Ash,Oak, Sapele and everything else that I have fed it with no problems what so ever, leaving a lovely planed surface with minimal snipe. Would have liked a cutter head lock facility, however no machine usually has all the features you would like it to have.
All in all im extremely happy with my purchase plus I have a 3 year warranty to boot.
ExcellentAnthony Crack - 20.05.2018
Im thrilled with the build quality of this capable machine. The essential bits that sandwich wood, like the machine head element and base of feed plate are strong, heavy and robust (metal). The plastic housing is very much a non-issue as far as strength and performance goes and helps keep the price down without sacrificing performance.
If you are new to thicknesser/planers, just as the table saw is in a league of its own when compared directly to the general hand saw for cutting speed, this performs similarly when compared to a hand plane, or even an electric plane (I have both) - It does the job of ten men.
The roll-in speed is medium, strong and steady. When working with a supply of shorter bits of wood, this machine deals with planking nearly as fast as you can pick it up, feed it in, remove and replace it. You'll develop a wonderful rapport with your machine quickly, fast establishing how many revolutions of the handle will clean up the face of the wood. Sometimes one or two turns, but you might dial them in, in a half turn at a time, or a third or quarter of a turn are all that is needed. Every bit of wood is different, and once a plank (if it is dirty and out of a skip) is nearly done, you might give it an extra pass at a third of a turn. You learn exactly what input is necessary to take down the wood to the desired height, colouring, removing surface mould, rot, debris, dirt or wood material by visual reference alone and the learning curve is easy. So easy, you don't need the height gauge at all unless your planking needs to be a specific measurement.
The feeder entrance is very tightly and well matched to the cutting blade height. What can JUST squeeze in, will just get planed. You never remove too much surface material once you are accustomed to its behaviour and performance, the machine is predictable in that sense (in a good way) and consistent.
I want to emphasise the sturdy and robust element again. My machine is NOT bolted down, is also sat on top of a Black + Decker workmate like another reviewer, and handles 8 foot planking without tipping itself over, even on occasions when I let go of the end momentarily (which I try not to do). It is very heavy and extremely well planted, and the wood inserted remains pinched, level and even within the machine due to its weighty build, especially the quality innards, preventing snipe, which is not an issue at all. (Snipe is the uneven extra planing at either end of planking). Yes, it is possible to snipe the wood, but this only happens very occasionally when Im not properly supporting lengthy and weighty timber on entry/exit. The snipe is not a problem. If it is happening, adjust your technique and it will be eliminated. There is nothing wrong with the machine on the rare occasions that you experience a little snipe.
The first thing you'll notice when you open the box, at the top of the machine, is the bar which looks like a carrying handle. Don't pick it up by this bar, as it is not a carrying handle. There are handles at the sides (at the top of the machine) of the machine for carrying. Use those instead.
The orange knob attached to the crank arm can be turned clockwise to raise the cutting head, or anti-clockwise to lower it. The raise/lower speed is very slow to dial in, requiring multiple revolutions just to raise or lower the cutting head a fraction - this is very good, as you want to be able to dial in tiny fractions of height adjustment accurately.
Dial in too much cut, and the machine copes just fine. You can hear when the motor is under slightly more or less strain but it keeps cutting cleanly and evenly without judder, at good speed regardless. It is a powerful portable planer and thicknesses and an excellent workhorse.
If you have any volume of work to do, this will pay for itself RAPIDLY in terms of time and cost savings. Im very impressed with the quality of the machine as well as its performance, for the very reasonable price.
- Installation is simple. Attach handle to crank arm, push down to attach it.
- Screw on rear dust blower with 4 screws provided.
- Raise the cutting head and remove the Styrofoam block head which protects it in transit.
Enjoy reading the manual over a coffee, or just plug it in, turn it on and fire it up.
Ear defenders: The the roller housing the cutting blades within the machine takes a couple of seconds to spin up to speed, and when planing volumes of work, you do want to be wearing ear defenders, unless you are just putting one or two planks through per day. It is loud and will be heard by the neighbours too.
The machine itself about as noisy as a table saw when spinning by itself, but the cutting noise is perhaps less noisy, less shrill than a table saw when planing. The total noise volume is significant though, in the same league as a table saw at work. i.e. Noisy! Protect your ear drums and use ear defenders.
Its very nice to be able to pull rough timber from a skip and have it transformed into perfect planking which looks both shop bought and also new, in just a few minutes with a couple of passes. The machine holds planks steady when they are fed in edge ways, too, so all sides of planking can be worked on all sides.
What it won't do is square up wood that was cut on an angle (or a deliberate mitre or slant) like a parallelogram. If the face you feed into the machine has a continuous and uniform angle cut into it, it will level the face but maintain the angle.
Also, very long and unintentionally twisted planking will come out at the same angle it goes in at. The inner chamber is less than a foot long and the front and rear ends of planking, if twisted, won't self straighten. Only the centre foot or so is steadied and planed level. A twist in a plank may be by several degrees, but that twist may exist over several feet. You need a manual hand plane to eliminate that.
But it copes brilliantly when cutting full width planking, too. Maximum cut (I measured) width is 31.5cm. Electric motors don't like to be strained, so don't over work it, and it should last a lifetime. It certainly feels like it will last many years with only the removable blades needing resharpening occasionally.
The 31.5cm max width has a curved input around the entry edges. What this means is that if you insert a long plank slightly skew, the curved edges will slowly push the wood straight if the wood being planed is put in at an angle. Another nice touch, it self straightens your product.
The blades come sharp! They are easily removed (with magnets supplied) and turned around so the other side (also sharp!) can be used.
Remove them and search YouTube where you'll find a simple video on how to sharpen the blades yourself (easy!).
New blades can be bought for around £21 online. Search the model number. The process is as simple as removing a few bolts (hex key supplied) and replacing the blades. You can't insert the blades skew, as they have holes in them and fit into/onto a housing, so once you have taken them off, putting them back on straight is pretty much guaranteed. Nice and easy.
There is only one small niggle which I have, and that is the dust extraction port. If you do not have a shop vac, it often becomes blocked, but does not affect performance. The air passing through this channel sometimes helps clear the tube, this may have been improved on the latest model - not sure. There is very nearly (but not quite enough) air power required to keep this channel free of debris without a shop vac. What this means is that without a shop vac sucking on the extraction port, it often becomes clogged and shavings fly out the front (the front is end wood is fed into the machine, same side that the start/stop buttons are located). This in practise is not an issue, other than the mess that it creates. There is enough wind inside the machine that if you never attached a shop vac, the constant build up of shavings is always flying out the front anyway, so the front remains clear, level and even, even if you do not own a shop vac. So it works with or without one, very well in practise. Just messily without one (as you'd expect!)
The sheer volume of shavings (I mention this just in passing) is like other planers - i.e. substantial. You'll have unlimited free pet bed shavings or material for the meat smoker, for life. (Just be sure not to use the kiln dried treated nor green-stained timbers in either case).
If you are fortunate enough that you can afford one, you won't look back. I can't fault this machines build or performance all woods, including hardwoods including wet green hardwoods Ive planed at the 30cm width, it just works. Powerfully and brilliantly. Once you have planed two sides of a plank or block, the edges are restored into perfectly sharp 90 degree corners every time.
Based on my excellent experience of this fantastic machine, if you can afford it, buy it!
Utterly fantastic machine, which I have not been able to fault. It is a proper little workhorse and Paul - 16.05.2018
excelent machine gives a great finish to rough sawn wood very happy with the results i am getting from soft & hard wood
A cut abovedavid lee - 09.05.2018
Great thickness planer for the price. I use my planer a ton, handles hardwoods like a champ. Had a problem with mine a year and a half after I purchased it and they had a new replacement sent to me within a week. Very happy with the company and tools
Great customer serviceDavid - 07.05.2018
Bought in France. Very good product. Used since a few weeks.
Pros: price, quality, very easy to handle, deals with any wood type (even hard ones)
Cons: evacuation pipe maybe too small for large wood shavings. Blades not very strong (already "marked" and let little grooves in the wood).
When I opened the package, the bottom central metal part was damaged. Triton sent me a (nearly) new one - without discussion.
Efficient product - serious brandBelgy Patrick - 05.05.2018
Great machine, nicely made and gives a great finish straight out of the box with only a hint of snipe which I am sure I can eliminate. Very pleased with my purchase
Triton TPT125Chris Boyda - 30.04.2018
The Thicknesser is my first Triton machine and I am thrilled.
The planing result is very good and the performance is sufficient.
Exactly for my little wood workshop the right maschine.
At my next machine purchase I will certainly look at Triton.
TPT125 ThicknesserPeter Kohlmeier - 29.04.2018
My new Triton thicknesser has surpassed my expectations by a country mile! With its small footprint, big capacity and quality output it has not only saved time, it's the improved quality of finished items that's most impressive.
Small outlay, big outputPeter Stanley - 24.04.2018
Used straight out of the box with little assembly or adjustments and achieved pretty impressive results. The Finnish is absolutely superb although have only used it on pine/softwood. Look forward to using it on some new projects.
Triton thicknesserChris Boyda - 18.04.2018
it's a very light machine to move. the planer is of a very great efficiency. she is not noisy. the chip collector does well are working with the vacuum cleaner. I personally find it pretty with its orange color. I advise anyone who wants to start working wood, it is easy to take in hand
my planerMARCADAL ERIC - 17.04.2018
I have been using the 1100W Thicknesser for about a month and I must say I am very impressed. The build quality is solid and robust; as good as some machines costing nearly twice as much. So far I have put some Oak, Sycamore and lime through the machine with excellent results. The planed surface requiring just a small amount of sanding. I have experienced a small amount of snipe, but nothing significant. Overall I am very pleased my purchase and would recommend this machine. It is ideal for a small workshop.
1100W ThicknesserPeter - 13.04.2018
Being fairly new to woodwork it would always take for ever to get the wood feeling smooth, when I cut on my table saw I then pass through thickness planner to make it like glass, now no longer when I make something does it take me ages to sand and smooth, great tool and easy to use. Thanks
Smooth like glassn Hotchkiss - 08.04.2018
Does a great job just the ticket for DIY
ThicknesserJohn Cordell - 04.04.2018
I have never used a thickness/planner before, after reading the instructions in conjunction with the tool I found it really user friendly. The finish was much better than I expected, I didn't have to carry out any sanding. Value for money was very good.
TPT125Henry Evans - 01.04.2018
Very good product, poor manual with vague instructions and unclear photographs spoiled the initial impression.
TPT125 thicknesserJohn Howsego - 28.03.2018
I bought this Thicknesser back in February and because of cold weather could not use it in my garage workshop here in Scotland, but today finally desperate to use it I set it up on my bench bolted it down waxed the tables and put my first project through it. I am delighted the wood finish was first class could not fault it a first class tool I would certainly recommend it for the workshop.
Must have tool for a woodworkers workshopRobin Brown - 26.03.2018
I have a Tudor style house in Perth. A few months ago we replaced 30 plus pieces of decorative "Tudor style" timber that was nailed on to the walls, as they were showing severe weathering..They had only been painted twice in around 25 years, catching the full force of the sun and rain in Perth.. The timber size was 120mm x 30mm in various lengths. I wasn't sure whether I should throw it away or try and use it. Luckily I had bought the Thicknesser from Masters hardware when they were closing down a year+ ago. This was my first time ever using a thicknesser. I ran this timber thorough the machine once on each side and It quickly removed the old paint and exposed beautiful lengths of Jarrah timber ... I couldn't believe how easy it was to clean this timber up. Best of all it required no sanding as the cuts were super smooth and perfectly square. The finish is outstanding. I was able to quickly build an outdoor trolley for my 60" TV with the reclaimed timber.. This has made me aware of the value of looking out for old timber on the side of the road that could be cleaned up and rejuvenated in minutes, and used in building propjects. This great tool has been added to my other Triton Tools Table Saw, and Router tables, and Biscuit joiner. Thank you!
A Really Handy Tool for precision wood workingBenzie Pikoos - 26.03.2018
This is the first Triton tool that I’ve owned and was originally looking at other brands for a new thicknesser. I came across the Triton during my search and am glad I did.
It seems very well made, easy to set up and hasn’t missed a beat. The finish it gives means that the wood doesn’t even need a final sanding. Little things like the maintenance tool storage to enable quick access and the magnets to lift the blades make it all the more impressive. I will definitely be buying more Triton kit.
Reliable, great performing bit of kitNicholas Watson - 21.03.2018
Originally i purchased a titan brand planer thicknesser because of reviews i had read. On the second time of using it the mechanism self destructed at which point i returned it and took the plunge on the TPT125. First impressions are impressive, well built, simple to set up and get started and gives a fantastic finish on the timber with no fettling! Chip extraction works great, height adjustment simple to use and depth scale is bang on out of the box... what more could you ask for, should have bought the Triton from the start and not wasted time on an inferior machine so bite the bullet you wont regret it!!
Triton TPT125Paul Phillips - 20.03.2018
The finish I get from this is nothing short of superb. It is easy to use, MUCH quicker to get loads of wood processed than I expected and did not clog up my dust extractor. Makes a LOT of shavings, sure, but then I was processing many metres of wood. It puts a mirror-smooth finish on both softwood and on oak that needs no sanding and snipe was less than expected as well.
All in all - very happy and the good reviews this Thicknesser receives are well justified.
Even better than the reviews suggestMike Peacock - 20.03.2018
I am very happy with your Tool. I will like in time to buy more tools from you.
They are Professional, very good Quality and look also very nice. Thank you!
Top Product!Iulian Surubaru - 18.03.2018
With TPT125 price you cant find any thicknesser what is also great tool. TPT125 is GREAT and I really enjoy thicknessing after buying TPT125. Olny thing what I'd lik is to have it with Helical Spiral Cutter Head. Hope that it will come soon at least as addition.
Just joyKristjan - 16.03.2018
I started getting in to woodwork in a big way and started curving every side of pieces I could with a router but always ended up spending hours sanding and smoothing. After googling I came across the triton thickness planer, I did think twice about the price as I’m on a budget but thought it would save a massive amount of time but make using old pieces of wood a reality, was I right, started on my first piece and was amazed with the finish. Now my new order of tools for wood work is the table saw to cut slightly larger, then through the thickness planer and I’ve got a piece of wood that is like silk.
It’s now in my top 5 tools I use all the time, making some gates for inside has become twice as quick without sanding them after and to be honest who likes sanding!
Great product and makes wood with a glass finishIstaeted - 11.03.2018
I have had my Triton planer for two months now and it is working like a charm.
12.5 PlanerDavid Shimp - 08.03.2018
I have only used it a couple of times but the results have been impressive. It gave a great finish to a 300mm wide plank of oak.
MrChris Riggs - 07.03.2018
Very compact. Easy to use.works very well
All my rough sawn timber is now smooth & ready to use.bought some cheap walnut tinder planed up now worth 3times the price.Saved me a small fortune.
Planer thicknesserEddie - 07.03.2018
Purchased this a couple of weeks ago, used this for a couple of small jobs, very surprised just how good this performs, really pleased with item and great value for money, now just waiting for Triton to release a powerful bench rip saw like the dewalt 745.
Triton 1100W Thicknesserjulian - 01.03.2018
Works well not too noisy leaves a clean finish for the price a good machine.
Tpt125 thicknesserColin walker - 28.02.2018
Unpacked this thicknesser it worked well from day one no adjustments required and the finish is superb I should of brought it sooner.
Great Little MachineJohn - 27.02.2018
My Triton thickness planer has been a great addition to my wood shop. It creates a nice useable surface so that I am able to better quality work.
Mr.My thickness David Shimp - 22.02.2018
The machine looks to be well built but unfortunately two successive machines had the same fault, a faulty overload/reset switch, which would not reset, also the overload was triggered even when the machine was under no load withwood passingbthrough but not cutting
DisappointingThe - 21.02.2018
I've used the machine for approx 2 months and found it to be a great asset to my workshop. Having over 300mm of width is fantastic. Have not changed out the bladed yet so cant comment on that, but for what I've used it for it have been very good.
Excellent piece of KitNick O&#39;Donoghue - 20.02.2018
Pulled it out of the box took my time getting the in and out feed tables just right, because you don't want snipe! Mine has very minimal, built a nice portable stand for it, and let me tell you for the price point it works great.
Great tool!Ken Vodicka - 19.02.2018
Brilliant, straight out of the box and silky cut and finish. Beats the others hands down.
ThicknesserTerry Ward - 17.02.2018
excellent results a very good finish on some oaks i was using and reasonable priced compared to other thicknessers.
1100w thicknesserjames newland - 13.02.2018
Just finished planning rough sawn 2 1/2 inch thick 4ft. Long board came out beautiful. Triton's planer worked flawlessly!
Great tool!Ken Vodicka - 05.02.2018
Just out of the box, 1st job cut like silk - brilliant job. No snipe. couldn't ask better than that.
Thicknesser TPT125T Ward - 03.02.2018
excellent results with different sizes and species of timber
1100w thicknesserjames newland - 30.01.2018
viskas butu gerai jei ne nelygiai nuobliuoti galai.
patenkintas is daliesAivaras Rudžianskas - 17.01.2018
Works great, easy to operate
I would give this tool 4 stars
PlannerJoel James - 17.01.2018
I have never used one before but always thought it would make life a whole lot easier when prepping timber. Oh my goodness. The result was unbelievable. I didnt even need to sand. Smooth as! Pull it out of the box and away you go - pretty much. Best purchase ever.
Thicknesser heavenDarren Fowles - 16.01.2018
Fast to set it up, instructions could be better but barely needed. Simple to operate, does the job its supposed to do without problem. On limited use maybe 4 hrs total it presented no difficulties creating 4x1 inch Douglas fir boards from raw timber with approx moisture content of 20%.
Will give 5 stars as no complaints problems noted, but note I have only used for 4/5 hours total.
Thickness planer review.Practical wood and art. - 26.12.2017
Great bit of kit. Easy to set up out of the box. Leaves a finish that doesn’t need sanding
ThicknessesG - 26.12.2017
After much consideration, I chose this thicknesser having read only good reviews about it. I'm not disappointed. There was one small accessory missing from the box, but the supplier sorted me out with a replacement part within 24 hours. The TPT125 is really solidly built and the height adjustment works smoothly. I've only run a few test pieces through so far (rough sawn softwood, reclaimed softwood and reclaimed oak) but the results with each piece have been perfect. The surface finish on the planed timber would be hard to beat even with fine sanding... it's silky smooth! I can't vouch for reliability yet, but judging by the build quality and the 3 year warranty (don't forget to register) I'm expecting it to be good. A good solid machine.
Excellent value and qualityMichael Smith - 18.12.2017
Fantastic piece of kit for the amateur or the professional. Powerful, sturdy and robust. planes to a very high standard and so easy to change blades.
Triton ThicknesserTIM NORMAN - 17.12.2017
Fantastic bit of kit. Easy set up out the box. The finish it leaves doesn’t even need sanding
317mm ThicknesserJamie Thompson - 16.12.2017
Brilliant piece of kit that makes life so much easier. Even hardwoods go through it like a knife through butter, very pleased with it.
My TPT125 arrived with one of the blade change accessories missing, but the retailer (Screwfix) quickly sorted this. The unit is nicely built and seems very sturdy. I've run a variety of timber through it (hardwood and softwood) and all have come out with an excellent, silky finish. Really pleased with it.
Good quality and valueMichael Smith - 04.12.2017
Really pleased with my new 'Toy'- it's a great machine and I have been using it non stop since I brought it.
It is solidly built, very powerful, easy to change blades and does a fantastic job. I would recommend this to both DIY and serious professional
Thicknesser - Excellent bit of kitTIM NORMAN - 01.12.2017
Well packaged, well made, quiet and easy to use. Just a great machine.
Triton have done it againandrew grant - 01.12.2017
I read a lot of reviews to guide me on my purchase, I’m oleased I bought this product it’s well built and cuts very good. I would recommend buying this tool it’s a cut above the rest on the market.
Triton TP125 thicknesserBrian Morrison I - 01.12.2017
It works great, just wish it doesn't have snipe issue. A waste of wood.
My planer.Wayne Lizotte - 28.11.2017
Emballage super, le montage de quelques pièces facile et une qualité de finition nikel
Excellent Dégauchisseuse pour un prix abordableManuel Garcia Repullo - 26.11.2017
I had 5 slabs of Ash 250mm wide with various thicknesses to make a television corner unit and wanted a Thicknesser to plane them down to the same thickness. No problem with this machine and what a finish it gives.
TPT125 THICKNESSER Exellent kitMichael Jones - 18.11.2017
A valued and very useful addition to my workshop. I can now complete projects that were not possible before.
TPT125 ReviewIan Randall - 14.11.2017
Since I bought the thicknesser it has worked flawlessly and has given me super smooth results. (apart from a rattle which seems to have stopped after first using)
I like it, it has worked flawlessly. (apart from a rattle which seems to have stopped after first usmartin Roscoe - 07.11.2017
Absolutely delighted with this piece of kit. Easy to use, effective and a three-year warranty for a reasonable price. Would definitely recommend.
ThicknesserLiz Munnings - 06.11.2017
Very pleased with this tool. Easy to use and very efficient. I have been able to attempt a number of projects I would have been unable to contemplate in the past
TPT125Ian Randall - 30.10.2017
Inexpensive good quality thicknesser. Very suitable like afirst power tool for beginner woodworker. I am completely satisfied
Heb de bank nu diverse keren gebruikt en moet zeggen hij voldoet prima.
Er zijn enkele kleine puntjes waar je op moet letten: zaag het hout niet precies op maat maar laat aan beide kanten ca 5 cm overschot zitten.
Bij harsrijk hout moet je wel een houtglijmiddel gebruiken.
Ik kan deze bank, gelet op de prijs/kwaliteitsverhouding, zeker aanbevelen.
Prima vandiktebankB Schaper - 17.10.2017
Diese Maschinen ist einfach nur klasse ich kann sie nur jedem empfehlen TOP GERADE !
Super MaschineChristian Hausberger - 16.10.2017
strong machine, good value.
thicknesserIan Clark - 16.10.2017
Happy with my choice! Customer service is good. Machine does a fine job and is easy to maintain.
Good valueJim Shirley - 14.10.2017
Well made product , supperb results.
Thicknesses 317Tony Snelling - 07.10.2017
The machines are second to none excellent quality and very robust perfect for all jobs and the service team are brilliant fast and very professional I always but Triton their the best
serviceNigel brown - 30.09.2017
My planet thicknesser is an integral part of my thriving business. Does a perfect job on a daily basis.
OutstandingAlex wight - 29.09.2017
I've not had this thicknesser for very long, but I've put it through its paces with some heavy beech timber etc. Sniping can be a issue but with proper support (front and back) it's pretty much eliminated. This bit of kit has already saving me so much time over always Sanding material. Removing the chip shoot is the way to go because it tends to get blocked very easily. Overall a great bit of kit at a reasonable price.
Orange beautyDave - 26.09.2017
Fantastic for the price, solid contruction, easy to use, easy to replace/ flip blades and leaves a perfectly smooth planed finish.
BargainPaul Crandon - 20.09.2017
Only had this machine a month, but so far, SO GOOD.
Strong, robust stable. Planer is easy to adjust for thickness, works quickly and gives a beautiful glass smooth finish.
Definitely not quiet in operation, which is the only downside but how much do you have to spend to get a quiet planer? For £250 you won't find a better machine
Good machineRoss Buchanan - 18.09.2017
Bought this online a few weeks ago and I must say, I am very impressed. Watched loads of 'YouTube' clips showing various makes and models from other manufacturers and not one of them seemed to match the Triton1100W Thicknesser.
Bought it, had it delivered and used it for the very first time this week and now I am even more impressed, planed smoothly along the WHOLE length of the material I was using unlike the others that leave that little uneven bump at the end of the run. (Maybe Triton would upgrade a little and fit a warning beeper for little nails that I missed on inspection lol. Never mind, that was my fault and maybe Triton will feel sorry for me and send me a free set of new blades)
Overall, along with my other 'TRITON' tools, I can't recommend this product highly enough
1100W ThicknesserKeith Dutton - 09.09.2017
The Triton thicknesser / planer comes very well packed with everything to get you started in minutes. The instructions are not too clear and pictures are so dark that it is very difficult to distinguish or recognise parts being referred to in the manual. Once assembled I put the Triton through its paces and was very happy with the results. The old rough wood came out as well dressed timber that needed no sanding. It is a little powerhouse machine that can take on big jobs with ease and produces great results. I love the fact that you can plane in very small increments which is perfect to fine tune the thickness of timber.
I did have a lot of difficulty in removing and inspecting the blades as the retaining screws were so tight that the tool that is supposed to open them got damaged at the tip. Finally had to get the dealer to help loosen the screws with better equipment. I have reassembled the blades and now can remove them easily for sharpening or replacement. It is a great machine and well worth the money paid for it. It looks and feels solid and strong. Glad I got this unit.
Great value thicknesses planerMichael - 09.09.2017
I bought this a few weeks ago. No problems whatsoever. It represents very good value for money.
Thicknesser, TPT125graham belton - 05.09.2017
I was sceptical as to the quality of Triton's tools due to being relatively new to woodworking and the Triton brand itself. After reading many reviews, as well as taking advice from friends with the same tool or experience with the brand, I decided on the Triton thickness planer over other competitors. So far so good. Delivery was no hassle, with no damage to the boxes; the blades were sharp and well aligned out of the box. The outfield tables are adequate for most uses and seem to be bolted to the frame securely. The hand crank mechanism is very easy to use and gives a good depth when fully open, I especially like the 0.4mm increment on a quarter turn and 0.8mm on a half turn.
So far I've only put Bubinga, Cherry and Beech through it but I've encountered no issues with tearout which is often associated with bubinga due to its grain. I'm enjoying using the tool at the moment and hope that I continue to do so.
Triton thickness planerHarry - 17.08.2017
This is a well designed and manufactured product that is easy to use and powerful enough to carry out the tasks that it has been built for!
Triton planer/thicknesserArthur Ross - 13.08.2017
I liked this planer, but after 2 months one of the bearings broke. The service to fix it has been very good their representatives have been easy to reach and stay in contact with
317mm thickness planerDean - 03.08.2017
Works great. I'm pleased with product, also good price.
Thickneser 317Janez Yartz - 02.08.2017
This product has performed well so far, giving a quality finish to the timber used so far !
Tpt125Arthur Ross - 31.07.2017
.... is really positive :-)!
I have to prepare some pieces of oak wood to use them for special situation around my pool. So to bring them to the correct thickness needs less time and the quality of the surface was very good!
TP125 Thicknesser - my first impression ....Andreas Getzinger - 25.07.2017
I bought this as I had rough cut timber which was also uneven, it is perfect for planing wood and getting it all to the same size , leaves a smooth finish and great for diy or bigger jobs , money well spent.
Diy saviourNeil - 17.07.2017
I purchased the Triton 12 inch thickness planet to use on projects around the house. First I would like to say that the pricing is very decent compare with other brand. Second the tool is very easy to use. I quickly skim through the manual just to see for safety features other than that the tool is very straightforward. My only two things that I can say negatively is the knob for thickness adjustment gets dirty very easily the material used on that could be replaced with something more rigid so it doesn’t Get dirty easily. Moreover, the thin plastic film cover for the bottom plate where there wood slides through it was very difficult to remove so some of the film still there even after a few pass through. I’ve only use for one project and so far I like it very much it’s wide enough for most woods that I use for projects around the house.
Great planerPeter Lai - 13.07.2017
The planer did a great job. It has a noise coming from the motor that Triton says is the gears and should go away in time.
Worked great!Vince Fisher - 28.06.2017
First thicknesser I have used and am very impressed. Simple to set up and use.
Portable enough if required but best fixed to table top. I have mine on a mobile base.
Great productDave Carpenter - 24.06.2017
I read all the reviews on the internet and decided this was the thicknesser for me, not only the price was right, it also does the job for my usage. When it was delivered I spent the weekend making a table for it. At first I ran through some scrap wood and was pleased. Then I made a chopping board and was very pleased with the results, in fact I,m making a hardwood chopping board for myself so I,ll be using it this weekend. I am very pleased that I chose the triton thicknesser it realy does the job
Although I have not had too much time to use the planer up until now, it has performed well for me. I did not have dust extraction before and what a pleasure it is.
Triton PlanerKathy Lauwagie - 12.06.2017
Very pleased with the thicknesser, a robust and effective machine. Used for planing old pine floorboards, giving a high quality finish.
Quality finishDouglas Matthew - 08.06.2017
Just bought TPT 125 and really satisfied . Low level noise , accuracy is much more than expected . Light weight but sturdy construction . Absolutely best in class ad reasonable price . Thank you Triton
Very satisfiedBruno Viola - 07.06.2017
Great machine..sturdy build. Love the on board tool holder (knowing im not going to lose those).Cuts come out clean, barely need sanding.
Very Happy with this tool.
1100W Thicknesser 317mmMark - 07.06.2017
Really a great tool in an professional luthier workshop. Works very fine, compact size, great finishes on exotic (very hard) woods. An more, looks good!
I'm happy with the quality and the permonca of my TPT125!
AwesomeJoe Bass - 30.05.2017
I had a cheaper planer/thicknesser, but was never happy with the results. This was a bit more for just a thicknesser, but the finish is awesome and the results are good enough for a perfectionist like myself!
I would recommend, the next similar branded thicknesser up is twice the price!
Great tool- lost without itMark Justin - 18.05.2017
1000WDale Goeppinger - 18.05.2017
La máquina tiene una calidad muy buena y trabaja muy rápido, deja la madera perfecta casi sin lijar.
Funciona de maravillaJos&#233; Domingo Mart&#237;nez - 18.05.2017
Simple unpacking, fine and easy to use adjustments, perfect performance, fine wood finish. Perfect for a luthier with a small workshop with the need for an exact and homogeneous finish of the wood. A great investment! I'm very happy with my Triton!
AWESOME!!Joe Bass - 16.05.2017
This machine is easy to use. Setting cut depth is straight forward and accurate. The finish it produces is so good that I find that sanding is not required.
I am extremely happy with it and would recommend it.
Excellent little tool which I now wouldn't be without in my workshop. Easy set up and function. Would give it 5 stars if it had three blades
Thicknesser for someone who plays with wood!Anthony grey - 07.05.2017
Very pieased with this product, would recommend this to anyone thinking of buying it.
triton thicknesserkeith spreadbury - 01.05.2017
i bought a triton thicknesser a couple of weeks ago, it was very easy to set up and was useing it within minutes of receiving it. i do a lot of wood turning and find this a great tool , it does what it say,s it can do i would recommend this product.
triton thicknesserkeith spreadbury - 17.04.2017
Had to put project I got this for on hold, but the setup was pretty easy, machine is very well made, and initial setup passes were pleasantly surprising in quality.
Really good machineChuck Lawrennce - 11.04.2017
Seems like a reasonably well made machine and it certainly does exactly what it should. The machine it replaced was an APT machine with on the surface a similar construction but a more powerful motor. My last machine suffered a fair amount of use and abuse but finally gave up on me after 18 years, the direct replacement was almost £200 more than the Triton so as my usage was likely to be less in the coming years I thought I would save some money and buy the Triton which seemed to represent the best alternative to a more expensive machine. Its early days with the Triton as I've only had it a couple of months but I have used it on various hard and softwoods quite a bit and so far I am entirely happy with its performance. One rather annoying issue I had on setting up was the diameter of the waste outlet pipe which is rather an obscure size. I have a 4" vacuum system in my workshop and after contacting both Triton and a distributer I discovered that the only adaptor they could supply was to take the size of the outlet down to a domestic vacuum cleaner size! Eventually I managed to source an adaptor via Amazon that would just about do after a generous winding of gaffer tape round the Triton outlet pipe to increase its diameter to fit tightly inside the Charnwood 63mm to 100mm adaptor. In view of this and the fact that I do not know if the machine is built well enough to last I can only award 3* at this time. Its a pity companies don't wait a few more months before asking buyers to review their products, they may get more meaningful information!
TPT125 ThicknesserPhilip - 06.04.2017
Just purchased the TPT125 planar, and I am very impressed with the construction
of the machine and the ease of setup. It also came with a resounding endorsement
from the staff at the store. I have not had the chance to actually do some serious
use, but am anticipating great results. Very happy with the purchase.
Just purchasedChuck Lawrence - 30.03.2017
Easy to assemble out of the box. I adjusted it up and put it on top of my Workmate for now. Planed up some old pine from a recycled door. It gave a lovely surface finished, no need for sanding etc. Machine is loud, but no more so than my table saw; I always wear my ear defenders anyway. I connected it up to my standard shop vac and it handled the chips quite well. I might think about getting a bigger chip collector if I'm going to be using the thicknesser on lots of lengths of wood.
Good product, good pricePhilip Eost - 25.03.2017
I have only been using it for about 2 weeks, but so far it is working well. I have a vacuum system connected to the dust connection on it, but I still get some saw dust coming out from the infeed side. Overall I will give it a rating of 4 at this time.
Hobby WoodworkerRod Moss - 23.03.2017
I have been in the market for a Planer/Thicknesser for a while now and I tried to do my research to find the best bang for my buck. I was leaning heavily towards the Dewalt 735, but the price tag just wouldn't let me pull the trigger. I've seen a number of sponsored users on Youtube who liked the Triton products, but I couldn't find a good review of the machine in English. Since I have seen and heard great things about Triton themselves, I took a chance.
I received my planer and originally was slightly disappointed. The handle to raise/lower the head would hang up. It seems there was an issue somewhere in the gearing. I never even turned it on. I called tech support, and spoke to Debbie. She quickly addressed my concern and had a brand new planer shipped to me from the manufacturing plant. She provided a shipping label for me to return my original one.
Since I've received my new planer, I've had the opportunity to use it. It's a delight to use. I was pleasantly surprised that the noise level was lower than anticipated. The machine cuts very smooth and clean, only light sanding needed for a final finish. While I was hesitant to buy a machine that I couldn't find a review on, I'm onboard. Triton has a new customer and I've become very confident in not only their product, but their fantastic US customer support.
Thank you Triton.
I'm giving 4 out 5 stars, just for the fact I had to return my old device and wait on a replacement. The replacement was at my house, in less than a week.
Pleasantly SuprisedVictor Price - 13.03.2017
Die Hobelmaschine entspricht meinen Erwartungen.
zuverläslichHelmut Storch - 07.03.2017
This thicknesser is just the tool for my small workshop, easy to use but could do with a decent operators manual as I had not used one before.
Great resultsNigel Keen - 07.03.2017
Unfortunately the unit stopped working. It appeared as if the overload button was activated. Looked for a reset button but none found. Have returned the product to the supplier for assessment.
1100W Thicknesser 317mm PlanerKen Smith - 01.03.2017
The thicknesser is easy to setup and use well built, should last for years to come. Very impressed with the size of timber it can accommodate. this machine should save me a fortune as I know buy rough sawn and plan it myself. I use a lot of triton tools and have always found them well thought out and excellent in use at a good price compared to other mid range power tools.
Excellent productPaul Sharples - 28.02.2017
I was looking to set up a micro woodworking shop as I have limited space and looked hard at what was available and came across Triton initially via Men in Sheds. I then looked at the story behind Triton and then where I could buy their product. I selected Yandles and it was a good decision. I am a more than capable DIYer as I spent my school and university holidays ladding for tradesmen.
I invested in the TWX7 Workcentre with the contractor saw and router table modules with the additional extensions and wheels. I also bought the JOF001 router, the TPT125 planer thicknesser, the TSPS450 oscillating sander, the dust bucket and storage rack. As I said I've set up a Triton micro workshop - I followed the videos on how to assemble everything and I am now working on a couple of initial projects to make myself familiar with the ins and outs of what I've got - I've just pulled together a couple of sliding box joint jigs. I believe I have made a wise investment and I am very pleased with the way the workcentre allows me to have a professionally equipped workshop in such a limited space - I also enjoyed the buying experience with Yandles. Mark G – 230217
Microworkshop - I chose Triton - it's been a very good decisionMark Greenhalgh - 23.02.2017
Great little machine, used to recycle pallet timber into useable wood for projects.
The user guide is very poor but there are loads of tips on usage on YouTube,
Triton T125 thicknesserNigel Keen - 21.02.2017
If used as recommended and you don't try to take off too much on one pass, the machine works very smoothly and my set of 8 inch reclaimed mahogany slabs cleaned up very nicely. I was also pleased at how little dust was sprayed around the place (all things considered), when a vacuum cleaner was hooked up to collect the dust. I bought a set of adjustable floor-standing rollers to keep the wood level as it exits the machine, otherwise you get a slight 'dig-in' on the end inch or two - but that's the case with pretty much any machine of this type. I've always found Triton tools to be good value and this one is no exception.
TPT 125 Plane Sailing?paul white - 21.02.2017
SurveyDONALD ZINDREN - 20.02.2017
The tpt125 thicknesser is a excellent piece of kit, After setting up, the feed in and out table was fiddley to get flush,take time setting up for best results. When wood has been through thicknesser it comes out like a mirror finish with barely any sanding to do .Great machine
Excellent piece of kitMalcolm Lea - 19.02.2017
A little difference in thickness at the start of the work piece until it sits under both rollers. Otherwise a sturdy tool, easy to use and good value for money.
TPT 125 ThicknesserGerard Daly - 19.02.2017
Great machine does exactly what is is surposed to do
1100W ThicknesserAlan Alison - 15.02.2017
This is absolutely brilliant. Was worth ever penny. If mine ever broke i would replace it with another triton, it effortlessly rips through any stock i have fed it making it perfectly flat and looking like new again. Even old hardwood pallets when im too lazy to sand.
1100w thicknesserLuke - 31.01.2017
Just used this to plane some scaffold planks and it managed the job pretty well. Unsurprisingly the blades are now a bit dull but that's my fault for using it on such difficult timber. All in all a great buy.
Great planerA Eaves - 27.01.2017
A simple to work tool for getting your timber nice and flat. Ear plugs cut down the noise. For a DIYer it is a handy tool.
Triton Tpt125George Teng - 21.01.2017
I'm very satisfied with products.
Mr.Brane - 19.01.2017
This planer is a great piece of equipment which has done a great job flattening some huge scaffold planks I had which needed smoothing and thicknessing. The planer coped very well although the blades have taken a bit of a hammering so they will need replacing or sharpening before too long. The planer appears to be well made and solid and all in all is very good value.
Great piece of kit for the priceAndrew Eaves - 13.01.2017
I am very pleased with the machine. I will gladly recommendations to friends.
mr.Brane Oresnik - 05.01.2017
What can I say.
I have had this for about 1 month now.
It does what it says.
It does it well.
it is heavy enough that it does NOT shake itself off the bench
It is light enough to lift on and off the bench (by me anyway)
Haven't found any yet
1100W Thicknesser 317mmJames Knox - 09.12.2016
This 1100W Thicknesser from Triton is a superb little machine, i do quite a lot of woodwork (at home) and find it brilliant for producing the exact thickness I need, the blades are super sharp and leave a lovely smooth finish, I find it is a very sturdy machine.
Super 1100W ThicknesserGlyn Jones - 30.11.2016
Only done a few projects so far but solid and excellent finish, minimal snipe if used carefully. Very happy so far.
TPT 125 ThicknesserRob Haig - 29.11.2016
I spent ages on line reviewing thicknessers from the cheapest to the most expensive and this machine had such good feedback that l decided to give it a go. We'll I'm so glad l did because it's proved to be an excellent machine and I'm very, very pleased with it. The finish on both softwood and hardwood is extremely good, something that you might only expect from more expensive models. Build quality is very good, it also feels very robust and is easy to use. The question l been asked most is, 'how noisy is it?'. Well it is noisy, but then that's the nature of the beast and having borrowed a few different ones from friends to try, it is certainly not the loudest by any means. Just get yourself some good ear defenders and a bottle of wine for the neighbours! Would l recommend this planner? Yes, most certainly, especially at the price, it's excellent value for money. (Shropshire, UK)
Excellent machineMike Watkins - 28.11.2016
Bought this from Amazon to plane hardwoods. Its one of those tools that I wish I got a long time ago. This is my first Triton power tool, so I was a bit hesitant on buying this, but so glad I did. It is extremely powerful and easy too use, but very loud so ear protection a must!
Easy to UseN Alam - 17.11.2016
I am so pleased with this TRITON Thicknesser, It is the most efficient tool of its kind i have seen and gives a very accurate fine finish to the wood, I feel it good value for the money and would rate it the THICKNESSER of the age.
The Thickness of the ageBrian M Turner - 17.11.2016
This product is amazing first class
Thicknesser 5 starAnthony - 14.11.2016
Bought this at a recent visit to Screwfix Live. The Triton staff at the stand were excellent.
The thicknesser is reassuringly heavy and well made and so far has not posed any problems in use. What I would suggest is that you check all the packaging before disposal as both blade cover magnets had come loose and were hidden under the polystyrene in the box.
Nice bit of kitM Coles - 11.10.2016
So far have used to plane several 2.4m lengths of 44mm softwood down to 38mm.after checking setup Performed well. The only adjustment needed out of box was outfeed table height.
1100W Thicknesser 317mmS. Prince - 10.10.2016
Una regruesadora sencilla, pero potente, cumple su función a un precio muy económico, el único pero (si lo tiene) es que la entrada la aspiración es un poco pequeña y requiere de aspirador si o sí.
Por lo demás, una compra estupenda, solida, estable y las cuchillas reversibles te permiten exprimir al máximo su vida útil.
Regruesadora 317mmLucas - 03.10.2016
DOES THE JOB AND WELL
Triton Thicknessereason - 20.09.2016
i am very pleased with this machine. Solid construction but light enough to move if needed and very accurate . Ideal machine for the DIY'ers workshop.
1100W ThicknesserRoss Pauline - 04.09.2016
I have own this product about one week now. It seems to be guite a powerfull machine. It is a sturdy thicknesser which is pleasure to use.
PowerfullTapio Vuorinen - 01.08.2016
Kunden, die diesen Artikel angesehen haben, haben auch angesehen: